- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Teknor Apex Monprene® MP-1351J Thermoplastic Elastomer
Teknor Apex Monprene® MP-1351J Thermoplastic Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Teknor Apex Company |
| Trade Name | MONPRENE® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Teknor Apex Monprene® MP-1351J Thermoplastic Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Uses: Consumer Applications; Gaskets; Plumbing Parts; Pump Parts Forms: Pellets Processing Method: Extrusion; Injection Molding Injection Notes: Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C); Injection Rate: Fast Extrusion Notes: Screw Speed: 30 to 100 rpmInformation Provided by Teknor Apex
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.07 g/cc | 1.07 g/cc | ASTM D792 |
| Melt Flow | 5.00 g/10 min @Load 5.00 kg, Temperature 200 °C |
5.00 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 50 | 50 | 1 second, 0.250 inches; ASTM D2240 |
| Tensile Strength at Break | 4.14 MPa | 600 psi | 20 in/min; ASTM D412 |
| Tensile Stress | 2.62 MPa @Strain 300 % |
380 psi @Strain 300 % |
ASTM D412 |
| Elongation at Break | 550 % | 550 % | ASTM D412 |
| Compression Set | 16 % @Temperature 22.8 °C, Time 86400 sec |
16 % @Temperature 73.0 °F, Time 24.0 hour |
ASTM D395B |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 182 - 232 °C | 360 - 450 °F | |
| Middle Barrel Temperature | 188 - 238 °C | 370 - 460 °F | |
| Front Barrel Temperature | 193 - 243 °C | 380 - 470 °F | |
| Nozzle Temperature | 199 - 249 °C | 390 - 480 °F | |
| Zone 1 | 182 - 232 °C | 360 - 450 °F | |
| Zone 2 | 188 - 238 °C | 370 - 460 °F | |
| Zone 3 | 193 - 243 °C | 380 - 470 °F | |
| Zone 5 | 199 - 249 °C | 390 - 480 °F | |
| Die Temperature | 199 - 249 °C | 390 - 480 °F | |
| Melt Temperature | 199 - 249 °C | 390 - 480 °F | Processing Temperature |
| Mold Temperature | 35.0 - 48.9 °C | 95.0 - 120 °F | |
| Injection Pressure | 1.38 - 5.52 MPa | 200 - 800 psi | |
| Back Pressure | 0.172 - 0.689 MPa | 25.0 - 100 psi | |
| Cushion | 0.381 - 2.54 cm | 0.150 - 1.00 in | |
| Screw Speed | 50 - 100 rpm | 50 - 100 rpm |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Opaque |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® BFL2000 PC
- SABIC Innovative Plastics PC0700 PC (Europe-Africa-Middle East)
- Techmer ES Elastoblend® PA6/6 GF13 IM HS BK 13% Glass Filled
- Saint-Gobain COHRlastic® CF4480 High Heat Reversion Resistant Reinforced Solid Rubber
- Teknor Apex Uniprene® UN-7010-64NT Thermoplastic Vulcanizate
- Dow Nordel® NDR 4820P EPDM Hydrocarbon Rubber
- Addiplast Addinyl B2H G30 Flame Retardant Nylon 6, 30% Glass Bead
- Ashley Polymers Ashlene® R528LW Nylon 66
- Chevron Phillips Marlex® HMN 6060 Polyethylene, Injection Molding Grade, HDPE (discontinued **)
- Solvay Specialty Polymers Solef® 1009 PVDF Homopolymer (discontinued **)
Copyright © lookpolymers.com All Rights Reserved