- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Flexible Grade
- Teknor Apex APEX® 4109 Polyvinyl Chloride, Flexible
Teknor Apex APEX® 4109 Polyvinyl Chloride, Flexible
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Flexible Grade , PVC, Wire and Cable Grade |
| Manufacturer | Teknor Apex Company |
| Trade Name | APEX® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Teknor Apex APEX® 4109 Polyvinyl Chloride, Flexible.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Notes: 60°C General Purpose; RoHS Compliant Uses: Connectors; Grommets; Plugs; Strain ReliefsForms: Pellets Processing Method: Injection Molding Agency Ratings: UL QMFZ2 .E54709 Wire Types: Molded Components Additional Information: Temperature Rating: 60°C Recognized Component, CSA C22.2 No. 0.6, CSA Flammability Classification: 0.6HB at 0.84mmInformation Provided by Teknor Apex
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.42 g/cc | 1.42 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.010 - 0.012 cm/cm | 0.010 - 0.012 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 85 | 85 | 15 seconds; ASTM D2240 |
| Tensile Strength at Break | 13.1 MPa | 1900 psi | ASTM D638 |
| Elongation at Break | 290 % | 290 % | ASTM D638 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 60.0 °C | 140 °F | Continuous Use; ASTM D794 |
| Brittleness Temperature | -24.0 °C | -11.2 °F | ASTM D746 |
| UL RTI, Electrical | 90.0 °C | 194 °F | UL 746 |
| UL RTI, Mechanical without Impact | 90.0 °C | 194 °F | UL 746 |
| Flammability, UL94 | V-0 @Thickness 0.810 mm |
V-0 @Thickness 0.0319 in |
|
| V-0 @Thickness 3.00 mm |
V-0 @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Comparative Tracking Index | >= 600 V @Thickness 3.00 mm |
>= 600 V @Thickness 0.118 in |
UL 746 |
| Hot Wire Ignition, HWI | 60 - 120 sec @Thickness 3.00 mm |
60 - 120 sec @Thickness 0.118 in |
UL 746 |
| High Amp Arc Ignition, HAI | 60 - 120 arcs @Thickness 3.00 mm |
60 - 120 arcs @Thickness 0.118 in |
UL 746 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 182 °C | 360 °F | Processing Temperature |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Opaque |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics LNP FARADEX DS0036IR PC (Europe-Africa-Middle East)
- SABIC Innovative Plastics LNP LUBRICOMP AL003 ABS (Europe-Africa-Middle East)
- Polimeri Europa Extir® CM Giotto 5 AE Expandable Polystyrene - Continuous Mass/Flame Retardant
- Seals Eastern 5243 Neoprene / Chloroprene
- ExxonMobil 32 Mobil DTE FM Series
- ExxonMobil SAE 40 Mobilgard ADL Series
- Clariant Renol PA233G13 Nylon 6, 13% Glass Fiber, Improved Processability, Easily Colorable, Toughened
- Ashley Polymers Ashlene® 737 Nylon 6
- DuPont Performance Polymers Zytel® RS LC1200 BK385 Nylon 1010 (Unverified Data**)
- PolyOne Synprene® ST-6130 Thermoplastic Elastomer - SBC (discontinued **)
Copyright © lookpolymers.com All Rights Reserved