- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Heat Resistant, Molded
- Styron Magnumâ„¢ 758HP ABS, High Heat, High Impact
Styron Magnumâ„¢ 758HP ABS, High Heat, High Impact
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Heat Resistant, Molded |
| Manufacturer | Styron |
| Trade Name | Magnum™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Styron Magnumâ„¢ 758HP ABS, High Heat, High Impact.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resin are available in a wide range of melt flow rates, impact strength and heat resistance for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion and thermoforming.MAGNUM® 758HP ABS resin is a low gloss, high heat, high impact grade designed for use in small household appliances. It offers a good balance of physical properties and excellent injection molding characteristics.Data provided by Dow Chemical.This product line was spun off from Dow Chemical to Styron in 2010.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM Data |
| Linear Mold Shrinkage | 0.0055 cm/cm | 0.0055 in/in | |
| Melt Flow | 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C |
2.5 g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM Data |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 47.6 MPa | 6900 psi | ASTM Data |
| Elongation at Break | 15 % | 15 % | ASTM Data |
| Tensile Modulus | 2.34 GPa | 339 ksi | ASTM Data |
| Izod Impact, Notched | 2.19 J/cm | 4.10 ft-lb/in | ASTM Data |
| Impact Test | 42.0 J @Temperature 23.0 °C |
31.0 ft-lb @Temperature 73.4 °F |
Instrumented Dart Total Energy |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 105 °C | 221 °F | Unannealed; ASTM Data |
| Deflection Temperature at 1.8 MPa (264 psi) | 90.0 °C | 194 °F | Unannealed; ASTM Data |
| Vicat Softening Point | 117 °C | 243 °F |
Users viewing this material also viewed the following:
- P & P Technology BS3075 NA13 Monel Wire
- Polymer Resources PEI-G30 Polyetherimide, 30% Glass Reinforced
- Solvay Specialty Polymers FOMBLIN® Y H-VAC 40/11 PFPE Pump Oil
- ExxonMobil Gargoyle Arctic 234 SHC 200 Series
- DuPont Teijin Films Melinex® 539 Polyester Film, 700 Gauge
- 3M 203 Masking Tape
- Arlon Thermabond® 51A42X012 0.012" (0.305 mm) Cured Silicone Rubber with Fiberglass Substrate
- Ascend Performance Materials Vydyne® 22HSP NT Nylon 66, Conditioned
Copyright © lookpolymers.com All Rights Reserved