- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate, Impact Modified
- Styron CALIBREâ„¢ IM 401 18 Polycarbonate, Impact Modified
Styron CALIBREâ„¢ IM 401 18 Polycarbonate, Impact Modified
| Category | Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Impact Modified |
| Manufacturer | Styron |
| Trade Name | CALIBRE™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Styron CALIBREâ„¢ IM 401 18 Polycarbonate, Impact Modified.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
CALIBRE® IM401 series resins are impact modified, UL listed polycarbonate resins which contain mold release. CALIBRE IM 401 polycarbonate resins exhibit an excellent balance of impact strength and heat resistance.CALIBRE IM401 polycarbonate resins are typically used in applications requiring enhanced impact strength, such as automotive instrument panel components and retainers.Available Melt Flow Rates: 11, 18.Data provided by Dow Chemical.This product line was spun off from Dow Chemical to Styron in 2010.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.19 g/cc | 0.0430 lb/in³ | ASTM Data |
| Melt Density | 1.04 g/cc | 0.0376 lb/in³ | Melt density |
| Linear Mold Shrinkage | 0.0060 cm/cm | 0.0060 in/in | |
| Melt Flow | 18 g/10 min @Load 1.20 kg, Temperature 300 °C |
18 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM Data |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 57.9 MPa | 8400 psi | ASTM Data |
| Elongation at Break | 110 % | 110 % | ASTM Data |
| Elongation at Yield | 6.0 % | 6.0 % | ISO Data |
| Tensile Modulus | 2.30 GPa | 334 ksi | ISO Data. |
| Izod Impact, Notched | 6.41 J/cm | 12.0 ft-lb/in | ASTM Data |
| 3.74 J/cm @Temperature -50.0 °C |
7.01 ft-lb/in @Temperature -58.0 °F |
ASTM Data | |
| Charpy Impact Unnotched | NB | NB | ISO Data |
| NB | NB | ISO Data, Low Temp | |
| Charpy Impact, Notched | 3.00 J/cm² | 14.3 ft-lb/in² | ISO Data, Low Temp |
| 6.00 J/cm² | 28.6 ft-lb/in² | ISO Data | |
| Impact Test | 50.9 J @Temperature 23.0 °C |
37.5 ft-lb @Temperature 73.4 °F |
Instrumented Dart Total Energy |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Heat Capacity | 1.77 J/g-°C | 0.423 BTU/lb-°F | |
| Thermal Conductivity | 0.214 W/m-K | 1.49 BTU-in/hr-ft²-°F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 121 °C | 250 °F | Unannealed; 136°C (277°F) annealed; ASTM Data |
| Vicat Softening Point | 146 °C | 295 °F |
Users viewing this material also viewed the following:
- Plaskolite West Optix® CA-86 Clear General Purpose Acrylic Resin
- Hyosung Topilene R701 PP
- Johnson Matthey JM No1S Soft Solder Flux
- A. Schulman POLYBATCH™ Birch 60171U/4 Concentrate Based in LLDPE
- Zoltek Panex 30® Low Oxidation Knitted Carbon Fabric
- Dow Corning XIAMETER® PMCPPMX-200 10,000CS Silicone Fluid
- C.O.I.M. UREXTER® T 400 Polyurethane Two-Component Compound
- Axiall 4890 Flexible PVC
- Mo-Sci Corporation GA-40-I Green A Filter Glass
Copyright © lookpolymers.com All Rights Reserved