- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend, Glass Reinforced
- Styrolution Terblend® N NG-02 EF 8% Glass Filled ABS+PA (Conditioned)
Styrolution Terblend® N NG-02 EF 8% Glass Filled ABS+PA (Conditioned)
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend, Glass Reinforced , Nylon |
| Manufacturer | Styrolution |
| Trade Name | Terblend® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Styrolution Terblend® N NG-02 EF 8% Glass Filled ABS+PA (Conditioned).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Terblend® N NG-02 EF is a glass fiber reinforced UV stabilized ABS/PA blend with excellent dimensional stability and high impact strength. The enhanced flowability enables excellent processability and surface appearance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.12 g/cc | 0.0405 lb/in³ | ISO 1183 |
| Moisture Absorption at Equilibrium | 1.3 % | 1.3 % | 23°C/50% RH; ISO 62 |
| Linear Mold Shrinkage, Flow | 0.0060 cm/cm | 0.0060 in/in | ISO 2577 |
| Melt Flow | 44.8 g/10 min @Load 10.0 kg, Temperature 240 °C |
44.8 g/10 min @Load 22.0 lb, Temperature 464 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Ball Indentation Hardness | 62.0 MPa @Load 36.5 kg, Time 30.0 sec |
8990 psi @Load 80.5 lb, Time 0.00833 hour |
ISO 2039-1 |
| Tensile Strength, Yield | 40.0 MPa | 5800 psi | ISO 527-1/-2 |
| Elongation at Break | 12 % | 12 % | Nominal, 50 mm/min; ISO 527-1/-2 |
| Elongation at Yield | 4.0 % | 4.0 % | ISO 527-1/-2 |
| Tensile Modulus | 2.40 GPa | 348 ksi | ISO 527-1/-2 |
| Izod Impact, Notched (ISO) | 5.00 kJ/m² @Temperature -30.0 °C |
2.38 ft-lb/in² @Temperature -22.0 °F |
ISO 180/A |
| 25.0 kJ/m² @Temperature 23.0 °C |
11.9 ft-lb/in² @Temperature 73.4 °F |
ISO 180/A | |
| Charpy Impact Unnotched | 3.50 J/cm² @Temperature -30.0 °C |
16.7 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU |
| 8.00 J/cm² @Temperature 23.0 °C |
38.1 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eU | |
| Charpy Impact, Notched | 0.600 J/cm² @Temperature -30.0 °C |
2.86 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
| 2.50 J/cm² @Temperature 23.0 °C |
11.9 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 118 °C | 244 °F | VST/B/50; ISO 306 |
| 200 °C | 392 °F | VST/A/50; ISO 306 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 |
| Dielectric Constant | 3.8 @Frequency 1.00e+6 Hz |
3.8 @Frequency 1.00e+6 Hz |
IEC 60250 |
| Dissipation Factor | 0.090 @Frequency 1.00e+6 Hz |
0.090 @Frequency 1.00e+6 Hz |
IEC 60250 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 240 - 270 °C | 464 - 518 °F | Injection Molding |
| Mold Temperature | 40.0 - 80.0 °C | 104 - 176 °F | Injection Molding |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Natural | |
| Commercial Status | Europe |
Users viewing this material also viewed the following:
- Lehmann & Voss LUVOCOM® 1105-8264 PEEK, with CNT
- Kazanorgsintez Liquid Oxygen, By-Product
- Magyar Aluminum ALO-DN-7P Alumina
- Multibase Multi-Flex® G 7827 Black TPE Styrene Ethylene Butylene Styrene Block Copolymer
- Sibur DST-30-01 2nd Group Styrene-Butadiene-Styrene Block Copolymer (SBS-TPE)
- Unitika UNILATE® 1 SC PET
- ConocoPhillips Syncon® 320 Synthetic EP Gear Oil, AGMA No. 6EP
- DuPont Performance Polymers Crastin® LW9330 BK851 PBT+SAN (Unverified Data**)
- Asahi Kasei Thermofil N3-33FG-0214 33% Glass Fiber Reinforced, Lubricated
- 3M Dyneon™ PFA 6505TZ Fluoroplastic Granules
Copyright © lookpolymers.com All Rights Reserved