POLYMER SEARCH

Styrolution PS 454N HIPS

Category	Polymer , Thermoplastic , Polystyrene (PS) , Polystyrene, Impact Modified
Manufacturer	Styrolution
Trade Name	PS
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution PS 454N HIPS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Styrolution PS 454N is an impact resistant polystyrene with a good balance of toughness, high flow, heat resistance and high gloss.Good balance of toughness, high flow, and heat resistanceHigh glossUL 94 HBInformation provided by Styrolution

Physical Properties	Metric	English	Comments
Density	1.04 g/cc	0.0376 lb/inÂ³	ISO 1183
Moisture Absorption at Equilibrium	<= 0.10 % @Temperature 23.0 Â°C	<= 0.10 % @Temperature 73.4 Â°F	50% RH; ISO 62
Water Absorption at Saturation	<= 0.10 % @Temperature 23.0 Â°C	<= 0.10 % @Temperature 73.4 Â°F	ISO 62
Linear Mold Shrinkage	0.0040 - 0.0070 cm/cm	0.0040 - 0.0070 in/in	ISO 294-4
Melt Flow	14 g/10 min @Load 5.00 kg, Temperature 200 Â°C	14 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	90.0 MPa	13100 psi	ISO 2039-1
Tensile Strength, Yield	27.0 MPa	3920 psi	ISO 527
Elongation at Break	25 %	25 %	ISO 527
Elongation at Yield	1.4 %	1.4 %	ISO 527
Tensile Modulus	2.20 GPa	319 ksi	ISO 527
Flexural Strength	41.0 MPa	5950 psi	ISO 178
Flexural Modulus	2.30 GPa	334 ksi	ISO 178
Charpy Impact Unnotched	1.60 J/cmÂ²	7.61 ft-lb/inÂ²	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	80.0 Âµm/m-Â°C	44.4 Âµin/in-Â°F	ISO 11359
Thermal Conductivity	0.170 W/m-K	1.18 BTU-in/hr-ftÂ²-Â°F	DIN 52612-1
Deflection Temperature at 0.46 MPa (66 psi)	82.0 Â°C	180 Â°F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	78.0 Â°C	172 Â°F	ISO 75
Vicat Softening Point	82.0 Â°C @Load 5.10 kg	180 Â°F @Load 11.2 lb	120Â°C/h; ASTM D 1525
	91.0 Â°C @Load 1.02 kg	196 Â°F @Load 2.25 lb	50Â°C/h; ISO 306
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+18 ohm-cm	>= 1.00e+18 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	IEC 60093
Dielectric Constant	2.5 @Frequency 100 Hz	2.5 @Frequency 100 Hz	IEC 60250
Dissipation Factor	0.00015 @Frequency 100 Hz	0.00015 @Frequency 100 Hz	IEC 60250
	0.00040 @Frequency 1.00e+6 Hz	0.00040 @Frequency 1.00e+6 Hz	IEC 60250

Processing Properties	Metric	English	Comments
Melt Temperature	180 - 260 Â°C	356 - 500 Â°F	ISO 294
Mold Temperature	40.0 Â°C	104 Â°F	ISO 294
Injection Velocity	200 mm/sec	7.87 in/sec	ISO 294

Users viewing this material also viewed the following: