- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Schwartz Technical Plastics LAMIGAMID® 200 Polyamide 66, Conditioned
Schwartz Technical Plastics LAMIGAMID® 200 Polyamide 66, Conditioned
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 |
| Manufacturer | Schwartz Technical Plastics |
| Trade Name | LAMIGAMID® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Schwartz Technical Plastics LAMIGAMID® 200 Polyamide 66, Conditioned.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Application: bearing bushes, machine parts, gears, linersInformation provided by Schwartz Technical Plastics GmbH
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in³ | ISO R 1183 |
| Moisture Absorption at Equilibrium | 2.5 - 3.0 % | 2.5 - 3.0 % | DIN 53473 |
| Water Absorption at Saturation | 7.5 - 9.0 % @Temperature 20.0 °C |
7.5 - 9.0 % @Temperature 68.0 °F |
ISO R 62 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Ball Indentation Hardness | 100 MPa | 14500 psi | Hc 30; ISO 2039; partially |
| Tensile Strength, Yield | 60.0 MPa | 8700 psi | ISO-DIS 527 |
| Creep Strength | >= 8.00 MPa | >= 1160 psi | 1% elongation, 1000 h; DIN 53444 |
| >= 12.0 MPa | >= 1740 psi | 2% elongation, 1000 h; DIN 53444 | |
| Tensile Modulus | 2.00 GPa | 290 ksi | DIN 53457 |
| Flexural Strength | 60.0 MPa | 8700 psi | DIN 54352 |
| Flexural Modulus | 2.00 GPa | 290 ksi | DIN 53457 |
| Izod Impact, Notched (ISO) | >= 15.0 kJ/m² | >= 7.14 ft-lb/in² | DIN 53453 |
| Izod Impact Resistance | NB | NB | swinging hammer 0,1 DIN 51222; DIN 53453 |
| Coefficient of Friction | 0.080 | 0.080 | With lubrication |
| Coefficient of Friction, Dynamic | 0.42 | 0.42 | no lube; Steel 2162, Rvst=2E-6m, p=0.05 Mpa, v=0.6 m/s, t=40°C |
| Tear Strength Test | >= 1.5 | >= 1.5 | ISO-DIS 527 |
| K Factor (Wear Factor) | 9.00e-11 | 9.00e-11 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 70.0 - 80.0 µm/m-°C @Temperature 20.0 - 100 °C |
38.9 - 44.4 µin/in-°F @Temperature 68.0 - 212 °F |
DIN 53752 |
| Specific Heat Capacity | 1.67 J/g-°C | 0.399 BTU/lb-°F | |
| Thermal Conductivity | 0.200 W/m-K | 1.39 BTU-in/hr-ft²-°F | DIN 52612 |
| Melting Point | 255 °C | 491 °F | ISO R 1218 |
| Maximum Service Temperature, Air | 120 °C | 248 °F | Continuous |
| 170 °C | 338 °F | Intermittent | |
| Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Continuous |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+10 ohm | 1.00e+10 ohm | DIN 53482 |
| Dielectric Constant | 5.0 | 5.0 | DIN 53483 |
| Dielectric Strength | 40.0 kV/mm | 1020 kV/in | DIN 53481 |
| Dielectric Loss Index | 0.20 | 0.20 | DIN 53483 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Creepage/leakage Resistance | KA3b | DIN 53480 |
Users viewing this material also viewed the following:
- PolyOne OnFlex™ U 5470A-E0083 Thermoplastic Elastomer (TPE)
- Lucite International Elvacite ® 4080 Acrylic Resin
- Henkel Turco 5578-L Etchant
- Schott Glass 8326 Neutral Glass Tubing
- A. Schulman POLYBATCH™ Green 3012E Concentrate Based In Polyethylene
- EMS-Grivory Grivory® TSZ 3 PA666
- Arlon R33089X028 0.029" (0.737 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- Ametek Tungsten-Copper Composites AWC 8020
Copyright © lookpolymers.com All Rights Reserved