- HOME
- POLYMER SEARCH
- Thermoplastic
- Polysulfone (PSU)
- PolyOne Edgetek® PF-05GF/000 Polysulfone, Glass Filled (discontinued **)
PolyOne Edgetek® PF-05GF/000 Polysulfone, Glass Filled (discontinued **)
| Category | Polymer , Thermoplastic , Polysulfone (PSU) |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Edgetek® PF-05GF/000 Polysulfone, Glass Filled
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description/Features:Glass Fiber ReinforcedPolyOne First ChoiceInformation provided by PolyOne Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.272 g/cc | 1.272 g/cc | ASTM D792 |
| Water Absorption | 0.20 % | 0.20 % | 24 hr. Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0045 - 0.0055 cm/cm | 0.0045 - 0.0055 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 58.6 MPa | 8500 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Elongation at Break | 5.0 % | 5.0 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Tensile Modulus | 4.83 GPa | 700 ksi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Flexural Strength | 89.6 MPa | 13000 psi | ASTM D790 |
| Flexural Modulus | 4.83 GPa | 700 ksi | ASTM D790 |
| Izod Impact, Notched | 0.587 J/cm @Thickness 6.35 mm, Temperature 23.0 °C |
1.10 ft-lb/in @Thickness 0.250 in, Temperature 73.4 °F |
Method A, Injection Molded; ASTM D256 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 343 - 382 °C | 650 - 720 °F | Molding |
| Mold Temperature | 135 - 149 °C | 275 - 300 °F | |
| Drying Temperature | 135 - 149 °C | 275 - 300 °F | |
| Dry Time | 2 hour | 2 hour |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Product Form | Pellets |
Users viewing this material also viewed the following:
- ND Industries 730 Gasket Maker
- SABIC Innovative Plastics LNP FARADEX PS003E PA 6 (Asia Pacific)
- LATI LARPEEK 10 K/20 20% Carbon Fiber Reinforced Polyetheretherketone (PEEK) (Unverified Data**)
- Ineos ABS Centrex® 811 ASA Blend (discontinued **)
- Lord Adhesives 19 Mix-In Accelerator for 200, 400, 500 Series
- Hexcel® HexPly® 916 120°C Curing Epoxy Matrix
- Trelleborg Emerson & Cuming Eccobond® 56C Two-Component Silver Filled Electrically Conductive Epoxy Adhesive
- Abatron AboCast/AboCure 8502-1 Epoxy
- Arlon 51273R020 0.020" (0.508 mm) Cured Silicone Rubber with Fiberglass Substrate
- Axiall 5055 Rigid PVC, Extrusion, Natural
Copyright © lookpolymers.com All Rights Reserved