SABIC Innovative Plastics NORYL GTX GTX675 PPE+PA6

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Polyphenylene Ether/PPO
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	NORYL GTX
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics NORYL GTX GTX675 PPE+PA6.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Noryl GTX* GTX675 Resin is a blend of Polyphenylene Ether(PPE) + Polyamide(PA) resin that is mineral filled, conductive, and suitable for injection molding. The conductivity level is optimized to allow for primer-less electrostatic painting. The mineral content enables the material to be used in structural applications replacing metal or thermoset resins. The material is only available in black.

Physical Properties	Metric	English	Comments
Specific Gravity	1.26 g/cc	1.26 g/cc	ASTM D792
Density	1.26 g/cc	0.0455 lb/inÂ³	ISO 1183
Moisture Absorption	0.500 %	0.500 %	23Â°C / 50% RH; ISO 62
Water Absorption at Saturation	1.27 %	1.27 %	ISO 62
Linear Mold Shrinkage, Flow	0.0080 - 0.012 cm/cm @Thickness 3.20 mm	0.0080 - 0.012 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	13.6 g/10 min @Load 5.00 kg, Temperature 280 Â°C	13.6 g/10 min @Load 11.0 lb, Temperature 536 Â°F	ASTM D1238
Melt Index of Compound	12 g/10 min @Load 5.00 kg, Temperature 280 Â°C	12 g/10 min @Load 11.0 lb, Temperature 536 Â°F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	64.0 MPa	9280 psi	5 mm/min; ISO 527
	68.0 MPa	9860 psi	Type I, 5 mm/min; ASTM D638
Tensile Strength, Yield	65.0 MPa	9430 psi	5 mm/min; ISO 527
	69.0 MPa	10000 psi	Type I, 5 mm/min; ASTM D638
Elongation at Break	4.0 %	4.0 %	Type I, 5 mm/min; ASTM D638
	4.0 %	4.0 %	5 mm/min; ISO 527
Elongation at Yield	3.0 %	3.0 %	Type I, 5 mm/min; ASTM D638
	3.0 %	3.0 %	5 mm/min; ISO 527
Tensile Modulus	4.32 GPa	627 ksi	1 mm/min; ISO 527
	4.34 GPa	629 ksi	5 mm/min; ASTM D638
Flexural Yield Strength	106 MPa	15400 psi	1.3 mm/min, 50 mm span; ASTM D790
	108 MPa	15700 psi	2 mm/min; ISO 178
Flexural Modulus	3.92 GPa	569 ksi	1.3 mm/min, 50 mm span; ASTM D790
	4.22 GPa	612 ksi	2 mm/min; ISO 178
Izod Impact, Notched	0.390 J/cm	0.731 ft-lb/in	ASTM D256
	0.320 J/cm @Temperature -30.0 Â°C	0.599 ft-lb/in @Temperature -22.0 Â°F	ASTM D256
Izod Impact, Notched (ISO)	4.00 kJ/mÂ²	1.90 ft-lb/inÂ²	80104; ISO 180/1A
	3.00 kJ/mÂ² @Temperature -30.0 Â°C	1.43 ft-lb/inÂ² @Temperature -22.0 Â°F	80104; ISO 180/1A
Charpy Impact, Notched	0.300 J/cmÂ²	1.43 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
Dart Drop, Total Energy	7.00 J @Temperature 23.0 Â°C	5.16 ft-lb @Temperature 73.4 Â°F	ASTM D3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	42.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	23.3 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	50.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	27.8 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	45.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	25.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	50.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	27.8 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	187 Â°C	369 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	187 Â°C @Thickness 3.20 mm	369 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	187 Â°C	369 Â°F	Rate B/120; ISO 306
	188 Â°C	370 Â°F	Rate B/50; ASTM D1525
	188 Â°C	370 Â°F	Rate B/50; ISO 306

Users viewing this material also viewed the following: