SABIC Innovative Plastics Geloy FXW710SK ASA/SAN (Europe-Africa-Middle East)

Category	Polymer , Thermoplastic , ASA Polymer , SAN Polymer
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	GELOY
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics Geloy FXW710SK ASA/SAN (Europe-Africa-Middle East).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

GELOY FXW710SK is an ASA/SAN injection moulding grade. It is suitable for those applications that require sparkle colour effects.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.

Physical Properties	Metric	English	Comments
Density	1.09 g/cc	0.0394 lb/in³	ISO 1183
Moisture Absorption at Equilibrium	0.20 %	0.20 %	23°C / 50% RH; ISO 62
Water Absorption at Saturation	0.55 % @Temperature 23.0 °C	0.55 % @Temperature 73.4 °F	ISO 62
Linear Mold Shrinkage, Flow	0.0040 - 0.0070 cm/cm	0.0040 - 0.0070 in/in	on tensile bar; SABIC Method
Melt Flow	7.0 g/10 min @Load 10.0 kg, Temperature 220 °C	7.0 g/10 min @Load 22.0 lb, Temperature 428 °F	[cm^3/10 min] Melt Volume Rate; ISO 1133
	8.0 g/10 min @Load 5.00 kg, Temperature 260 °C	8.0 g/10 min @Load 11.0 lb, Temperature 500 °F	[cm^3/10 min] Melt Volume Rate; ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	95	95	ISO 2039-2
Hardness, H358/30	70.0 MPa	10200 psi	ISO 2039-1
Tensile Strength at Break	30.0 MPa	4350 psi	50 mm/min; ISO 527
Tensile Strength, Yield	38.0 MPa	5510 psi	50 mm/min; ISO 527
Elongation at Break	4.0 %	4.0 %	50 mm/min; ISO 527
Elongation at Yield	2.5 %	2.5 %	50 mm/min; ISO 527
Tensile Modulus	1.90 GPa	276 ksi	1 mm/min; ISO 527
Flexural Yield Strength	50.0 MPa	7250 psi	2 mm/min; ISO 178
Flexural Modulus	1.90 GPa	276 ksi	2 mm/min; ISO 178
Izod Impact, Notched (ISO)	5.00 kJ/m² @Temperature -30.0 °C	2.38 ft-lb/in² @Temperature -22.0 °F	80104; ISO 180/1A
	12.0 kJ/m² @Temperature 23.0 °C	5.71 ft-lb/in² @Temperature 73.4 °F	80104; ISO 180/1A
Charpy Impact, Notched	0.400 J/cm² @Temperature -30.0 °C	1.90 ft-lb/in² @Temperature -22.0 °F	V-notch Edgew 80104 sp=62mm; ISO 179/1eA
	1.20 J/cm² @Temperature 23.0 °C	5.71 ft-lb/in² @Temperature 73.4 °F	V-notch Edgew 80104 sp=62mm; ISO 179/1eA
Taber Abrasion, mg/1000 Cycles	155 @Load 1.00 kg	155 @Load 2.20 lb	CS-17; SABIC Method

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	90.0 µm/m-°C @Temperature 23.0 - 60.0 °C	50.0 µin/in-°F @Temperature 73.4 - 140 °F	ISO 11359-2
CTE, linear, Transverse to Flow	100 µm/m-°C @Temperature 23.0 - 60.0 °C	55.6 µin/in-°F @Temperature 73.4 - 140 °F	ISO 11359-2
Thermal Conductivity	0.210 W/m-K	1.46 BTU-in/hr-ft²-°F	ISO 8302
Deflection Temperature at 0.46 MPa (66 psi)	88.0 °C	190 °F	Edgew 120104 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi)	75.0 °C	167 °F	Edgew 120104 sp=100mm; ISO 75/Ae
Vicat Softening Point	86.0 °C	187 °F	Rate B/50; ISO 306
	91.0 °C	196 °F	Rate B/120; ISO 306
Flammability, UL94	HB @Thickness 1.00 mm	HB @Thickness 0.0394 in	UL 94 by SABIC-IP
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	2nd value; UL 94 by SABIC-IP
Oxygen Index	19 %	19 %	LOI; ISO 4589
Glow Wire Test	750 °C @Thickness 3.20 mm	1380 °F @Thickness 0.126 in	Glow Wire Flammability Index; IEC 60695-2-12

Electrical Properties	Metric	English	Comments
Dielectric Constant	3.2 @Frequency 1.00e+6 Hz	3.2 @Frequency 1.00e+6 Hz	IEC 60250
	5.2 @Frequency 50.0 - 60.0 Hz	5.2 @Frequency 50.0 - 60.0 Hz	IEC 60250
Dielectric Strength	16.0 kV/mm @Thickness 3.20 mm	406 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
Dissipation Factor	0.026 @Frequency 1.00e+6 Hz	0.026 @Frequency 1.00e+6 Hz	IEC 60250
	0.15 @Frequency 50.0 - 60.0 Hz	0.15 @Frequency 50.0 - 60.0 Hz	IEC 60250

Descriptive Properties	Value	Comments
Ball Pressure Test, 75°C +/- 2°C	PASSES	IEC 60695-10-2

Users viewing this material also viewed the following: