- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene with 10% Talc Filler
- RheTech Products T10P250-01 10% Talc Reinforced Polypropylene Copolymer, General Purpose Black
RheTech Products T10P250-01 10% Talc Reinforced Polypropylene Copolymer, General Purpose Black
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with 10% Talc Filler |
| Manufacturer | RheTech Products |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | RheTech Products T10P250-01 10% Talc Reinforced Polypropylene Copolymer, General Purpose Black.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications: Wire troughFan shroudsElectrical housingsUnderhood componentsInjection molding conditions reported in table.Information provided by RheTech Products.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.980 g/cc | 0.980 g/cc | 23/23°C; ASTM D792 |
| Filler Content | 10 % | 10 % | ASTM D5630 |
| Linear Mold Shrinkage | 0.0135 cm/cm | 0.0135 in/in | ASTM D955 |
| Melt Flow | 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 70 | 70 | ASTM D2240 |
| Tensile Strength at Break | 26.9 MPa | 3900 psi | 2 in/min; ASTM D638 |
| Flexural Modulus | 1.52 GPa | 220 ksi | Tangent; ASTM D790 |
| Izod Impact, Notched | 0.747 J/cm @Temperature 23.0 °C |
1.40 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
| Gardner Impact | 10.2 J | 7.50 ft-lb | ASTM D5420 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 104 °C | 220 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C | 140 °F | ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 193 - 221 °C | 380 - 430 °F | |
| Middle Barrel Temperature | 199 - 227 °C | 390 - 440 °F | |
| Front Barrel Temperature | 204 - 232 °C | 400 - 450 °F | |
| Nozzle Temperature | 210 - 221 °C | 410 - 430 °F | |
| Mold Temperature | 26.7 - 48.9 °C | 80.0 - 120 °F | |
| Drying Temperature | 65.6 - 82.2 °C | 150 - 180 °F | |
| Dry Time | 1 - 2 hour | 1 - 2 hour | |
| Moisture Content | <= 0.050 % | <= 0.050 % | Recommended |
| Injection Pressure | 55.2 - 103 MPa | 8000 - 15000 psi | |
| Hold Pressure | 2.76 - 5.17 MPa | 400 - 750 psi | |
| Back Pressure | 0.345 - 1.03 MPa | 50.0 - 150 psi |
Users viewing this material also viewed the following:
- Polimeri Europa Intene® 50 (A-AM-AF) Butadiene Rubber
- SABIC Innovative Plastics Lexan® HPX4REU PC Copolymer (Europe-Africa-Middle East)
- Mallard Creek Polymers Rovene® 6112 Resin Supported Emulsion
- Loxim 220 01V0 Polybutylene Terephthalate
- SABIC Innovative Plastics NORYL NH7114 PPE+HIPS (Asia Pacific)
- Saint-Gobain CHR® SGC6-10(R) CHEMLAM Copper Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape
- Cheng Yu Plastic PP236G1 Polypropylene, 10% Glass Fiber
- Dow Corning XIAMETER® PMCPOFX-0536 Fluid
- DuPont Teijin Films Mylar® 800C Polyester Packaging Film, 75 Gauge
- 3M Scotchkote™ 323 Purple Patch Compound
Copyright © lookpolymers.com All Rights Reserved