- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 46
- Nylon 46, Unreinforced
- Quadrant EPP Nylatron® 4.6 (ASTM Product Data Sheet)
Quadrant EPP Nylatron® 4.6 (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Nylon , Nylon 46 , Nylon 46, Unreinforced |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Nylatron® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Nylatron® 4.6 (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
| Water Absorption | 0.60 % | 0.60 % | Immersion, 24hr; ASTM D570 |
| Water Absorption at Saturation | 7.0 % | 7.0 % | ASTM D 570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 97 | 97 | ASTM D785 |
| Tensile Strength | 103 MPa | 15000 psi | ASTM D638 |
| Elongation at Break | 25 % | 25 % | ASTM D638 |
| Tensile Modulus | 3.24 GPa | 470 ksi | ASTM D638 |
| Flexural Strength | 117 MPa | 17000 psi | ASTM D790 |
| Flexural Modulus | 3.10 GPa | 450 ksi | ASTM D790 |
| Compressive Strength | 110 MPa | 16000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 2.24 GPa | 325 ksi | ASTM D695 |
| Izod Impact, Notched | 0.320 J/cm | 0.600 ft-lb/in | ASTM D256 |
| K (wear) Factor | 201 x 10-8 mm³/N-M | 100 x 10-10 in³-min/ft-lb-hr | QTM 55100 |
| Limiting Pressure Velocity | 0.0946 MPa-m/sec | 2700 psi-ft/min | QTM 55007 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 90.0 µm/m-°C @Temperature -40.0 - 150 °C |
50.0 µin/in-°F @Temperature -40.0 - 302 °F |
ASTM E831 |
| Thermal Conductivity | 0.303 W/m-K | 2.10 BTU-in/hr-ft²-°F | |
| Melting Point | 290 °C | 554 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 149 °C | 300 °F | Continuous |
| Deflection Temperature at 1.8 MPa (264 psi) | 160 °C | 320 °F | ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | ASTM D257 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Unacceptable | Unacceptable | |
| Acids, Weak | Limited | Limited | |
| Alcohols | Limited | Limited | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Limited | Limited | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
Users viewing this material also viewed the following:
- MV Labs CU400 Cu2Cl2 Copper(I) chloride
- Ritelok EC40 General Purpose Ethyl CA Adhesive
- Parker Chomerics THERM-A-GAP™ GEL 30 High Performance Fully Cured Dispensable Gel
- Nye Lubricants 782G (NG) Synthetic Oil
- Overview of materials for Polystyrene, Heat Resistant Grade
- Diamond Polymers ASA TW-17
- Dow DS6D21 Polypropylene Random Copolymer Resin
- Eurostar Star L PA6 D61 PA6, Injection Molded
- Aclo Accutech Polypropylene Homopolymer HP0339M20CL Mica Reinforced Coupled
Copyright © lookpolymers.com All Rights Reserved