- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Sharadaa Ceramics REFCAST ULCC90 Low Cement Castables
Sharadaa Ceramics REFCAST ULCC90 Low Cement Castables
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | Sharadaa Ceramics |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sharadaa Ceramics REFCAST ULCC90 Low Cement Castables.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: We bring to our clients a range of Low Cement Castables, that are available in varied alumina content and service range. Designed for abrasion resistance application, these are widely used in furnaces such as ladle back up lining, sintering furnace roof and soaking pit covers.Information provided by Sharadaa Ceramics Pvt. Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | >= 3.00 g/cc | >= 0.108 lb/in³ | Dried at 110°C |
| Grain Size | <= 6000 µm | <= 6000 µm |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Modulus of Rupture | 0.0118 GPa @Temperature 110 °C |
1.71 ksi @Temperature 230 °F |
|
| 0.0196 GPa @Temperature 1100 °C |
2.84 ksi @Temperature 2010 °F |
||
| 0.0255 GPa @Temperature 1500 °C |
3.70 ksi @Temperature 2730 °F |
||
| Compressive Strength | 68.6 MPa @Temperature 110 °C |
9960 psi @Temperature 230 °F |
Cold Crushing |
| 108 MPa @Temperature 1100 °C |
15600 psi @Temperature 2010 °F |
Cold Crushing | |
| 118 MPa @Temperature 1500 °C |
17100 psi @Temperature 2730 °F |
Cold Crushing | |
| 19.6 MPa @Time 86400 sec |
2840 psi @Time 24.0 hour |
Cold Crushing |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 2.03 W/m-K @Temperature 400 °C, Time 10800 sec |
14.1 BTU-in/hr-ft²-°F @Temperature 752 °F, Time 3.00 hour |
|
| 2.09 W/m-K @Temperature 600 °C, Time 10800 sec |
14.5 BTU-in/hr-ft²-°F @Temperature 1110 °F, Time 3.00 hour |
||
| 2.15 W/m-K @Temperature 800 °C, Time 10800 sec |
14.9 BTU-in/hr-ft²-°F @Temperature 1470 °F, Time 3.00 hour |
||
| Maximum Service Temperature, Air | 1750 °C | 3180 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | >= 90 % | >= 90 % | |
| Fe2O3 | <= 0.60 % | <= 0.60 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Permanent Linear Change | -0.2 - 0.2% | 800°C |
| -0.3 - 0.3% | 1100°C | |
| -0.8 - 0.8% | 1500°C | |
| Refractoriness | >1820°C | |
| Thermal Expansion | 0.9 | 1000°C, Reversible |
| Water Required to Mix | 4.5 - 5% |
Users viewing this material also viewed the following:
- Nylacast PA6C Cast Nylon 6
- Osprey Metals Fe50Cr Binary Alloy Powder (Grade 90% - 22)
- Resinlab® CYNERGY CA6901 Adhesive
- LG Chemical LUPOY SR3108FM PC, Halogen Free Flame Retardance
- Total PPH 3575CC Polypropylene Homopolymer, Film Grade
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 290ºF Cure Temperature
- Domo 1102M Polypropylene Homopolymer
- Arlon 49442R0075EP 0.0075" (0.190 mm) Cured Silicone Rubber with Fiberglass Substrate
- ALM PA-840-GSL Filled Nylon 12 Prototyping Polymer
- 3M Scotchcal™ IJ3630-20 Translucent Graphic Film
Copyright © lookpolymers.com All Rights Reserved