- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Unreinforced
- Polyram PlusTek RA124 Nylon 6.6, Injection Molding
Polyram PlusTek RA124 Nylon 6.6, Injection Molding
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek RA124 Nylon 6.6, Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Fast cycle polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | DIN 53479 |
| Water Absorption | 8.5 % | 8.5 % | DIN 53495 |
| Moisture Absorption at Equilibrium | 2.8 % | 2.8 % | 50%RH; DIN 53714 |
| Linear Mold Shrinkage | 0.014 - 0.018 cm/cm | 0.014 - 0.018 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 118 | 118 | ASTM-D785 |
| Tensile Strength, Yield | 90.0 MPa | 13100 psi | ASTM-D638 |
| Elongation at Break | 10 % | 10 % | ASTM-D638 |
| Flexural Strength | 90.0 MPa | 13100 psi | ASTM D790 |
| Flexural Modulus | 2.00 GPa | 290 ksi | ASTM-D790 |
| Izod Impact, Notched | 0.450 J/cm @Temperature 23.0 °C |
0.843 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 256 °C | 493 °F | |
| Maximum Service Temperature, Air | 70.0 °C | 158 °F | Continuous Use |
| 180 °C | 356 °F | Short peaks operation | |
| Deflection Temperature at 0.46 MPa (66 psi) | 210 °C | 410 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 100 °C | 212 °F | DIN 53461 |
| Flammability, UL94 | V-2 @Thickness 3.00 mm |
V-2 @Thickness 0.118 in |
Users viewing this material also viewed the following:
- ExxonMobil Escorene® LD-303 EVA Film Resin, Clarity, High Impact (discontinued **)
- PolyOne Edgetek® SF-20GF/000 Polyphenylene Sulfide (PPS), Glass Filled (discontinued **)
- H.C. Starck Amperit® 704.3 Chromium Oxide (Cr2O3) 99.5%
- Ter Hell Plastic Terez® PA 6 7500 TF 20 GF 20 Polyamide 6, 20% PTFE chemically bonded 20% glass fiber reinforced
- A. Schulman POLYBATCH™ Yellow P20199/2 Concentrate Based In Copolymer PP
- A. Schulman ComAlloy® E-12421 Reinforced High Flow Polyamide
- Braskem TI41000WM Impact Copolymer Polypropylene
- 3M AC-730 Class B-12 Aerospace Sealant
- Teknor Apex APEX® 3302-65 Polyvinyl Chloride, Flexible
Copyright © lookpolymers.com All Rights Reserved