- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, 30% Glass Fiber Filled
- Polyram PlusTek PB300G6 Nylon 6, 30% Glass Fiber
Polyram PlusTek PB300G6 Nylon 6, 30% Glass Fiber
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 30% Glass Fiber Filled |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek PB300G6 Nylon 6, 30% Glass Fiber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
30% Glass-fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.37 g/cc | 0.0495 lb/in³ | DIN 53479 |
| Water Absorption | 6.6 % | 6.6 % | DIN 53495 |
| Moisture Absorption at Equilibrium | 2.1 % | 2.1 % | 50%RH; DIN 53714 |
| Linear Mold Shrinkage | 0.0035 cm/cm | 0.0035 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 122 | 122 | ASTM-D785 |
| Tensile Strength, Yield | 180 MPa | 26100 psi | ASTM-D638 |
| Elongation at Break | 3.5 % | 3.5 % | ASTM-D638 |
| Flexural Strength | 250 MPa | 36300 psi | ASTM D790 |
| Flexural Modulus | 8.00 GPa | 1160 ksi | ASTM-D790 |
| Izod Impact, Notched | 1.20 J/cm @Temperature 23.0 °C |
2.25 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 218 °C | 424 °F | |
| Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous Use |
| 200 °C | 392 °F | Short peaks operation | |
| Deflection Temperature at 0.46 MPa (66 psi) | 217 °C | 423 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 205 °C | 401 °F | DIN 53461 |
| Flammability, UL94 | HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | DIN 53482 |
| Dielectric Constant | 3.8 @Frequency 1e+6 Hz |
3.8 @Frequency 1e+6 Hz |
VDE 0303/4 |
| Dielectric Strength | 80.0 kV/mm | 2030 kV/in | VDE 0303/4 |
Users viewing this material also viewed the following:
- TSE Industries Millathane® 26 Millable Polyether Urethane for Food Contact Applications
- LG Chemical LS130S PVC
- LyondellBasell PMA Propylene glycol methyl ether acetate
- Hyosung Topilene J742S PP
- SABIC Innovative Plastics Valox® EH7025AG PBT+PET (Asia Pacific)
- Chesterton 388 Synthetic Tapping Fluid
- China Tungsten YWR2 Tungsten Carbide with Rare Earth Additive
- Dow DNDA-9810 NT 7 Linear Low Density Polyethylene Resin
- Abatron AboCoat 8401-1 A/B Silver-Filled Electrically Conductive Epoxy Compound
- SK Chemicals SKYTHANE® 398A S series Polyurethane
Copyright © lookpolymers.com All Rights Reserved