PolyOne OnFlex™ HFFR 361-0190 Thermoplastic Elastomer (TPE)

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	OnFlex™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne OnFlex™ HFFR 361-0190 Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

OnFlex™ HFFR 361-0190 is a non-halogen flame retardant material designed for injection molding applications. New Product. Commercial specifications have not been established. - UL 94 HB compliantPurge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP).Information provided by PolyOne

Physical Properties	Metric	English	Comments
Specific Gravity	1.01 g/cc	1.01 g/cc	ASTM D792
Viscosity	105000 cP @Shear Rate 1340 1/s, Temperature 200 °C	105000 cP @Shear Rate 1340 1/s, Temperature 392 °F	ASTM D3835
Maximum Moisture Content	0.020	0.020

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	92	92	10 sec; ASTM D2240
Tensile Strength at Break	12.2 MPa @Temperature 23.0 °C	1770 psi @Temperature 73.4 °F	Die C2 hr; ASTM D412
Elongation at Break	220 % @Temperature 23.0 °C	220 % @Temperature 73.4 °F	Die C2 hr; ASTM D412
Tear Strength	57.2 kN/m	326 pli	ASTM D624

Thermal Properties	Metric	English	Comments
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	UL 94
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	UL 94

Processing Properties	Metric	English
Rear Barrel Temperature	182 - 193 °C	360 - 379 °F
Middle Barrel Temperature	210 - 227 °C	410 - 441 °F
Front Barrel Temperature	227 - 238 °C	441 - 460 °F
Nozzle Temperature	227 - 238 °C	441 - 460 °F
Drying Temperature	70.0 °C	158 °F
Dry Time	2.00 - 3.00 hour	2.00 - 3.00 hour

Descriptive Properties	Value	Comments
Agency Ratings	UL 94 .QMFZ2.E76261
Appearance	Black
Forms	Pellets
Generic Material	TPE
Generic Name	Thermoplastic Elastomer (TPE)
Injection Rate	Slow-Moderate
Manufacturer / Supplier	GLS Thermoplastic Elastomers
Processing Method	Injection Molding
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Uses	Connectors
	Plugs
	Wire & Cable Applications

Users viewing this material also viewed the following: