Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced, Flame Retardant |
Manufacturer | Plastcom spol. s r.o. |
Trade Name | SLOVAMID 6 |
Port | Ningbo port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Plastcom SLOVAMID 6 FRC 2 218/1M PA6, flame retardant.pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.16 g/cc | 0.0419 lb/in³ | |
Viscosity Measurement | 0.87 - 1.24 | 0.87 - 1.24 | |
Linear Mold Shrinkage | 0.0124 cm/cm | 0.0124 in/in | |
Linear Mold Shrinkage, Transverse | 0.0087 cm/cm | 0.0087 in/in | |
Melt Flow | 10 - 22 g/10 min @Load 0.325 kg, Temperature 270 °C |
10 - 22 g/10 min @Load 0.716 lb, Temperature 518 °F |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 65.0 MPa | 9430 psi | |
Elongation at Break | 3.0 % | 3.0 % | |
Tensile Modulus | 2.50 GPa | 363 ksi | |
Flexural Strength | 100 MPa | 14500 psi | |
Flexural Modulus | 2.35 GPa | 341 ksi | |
Charpy Impact Unnotched | 8.00 J/cm² @Temperature -20.0 °C |
38.1 ft-lb/in² @Temperature -4.00 °F |
|
9.50 J/cm² @Temperature 23.0 °C |
45.2 ft-lb/in² @Temperature 73.4 °F |
||
Charpy Impact, Notched | 0.200 J/cm² @Temperature -20.0 °C |
0.952 ft-lb/in² @Temperature -4.00 °F |
|
0.250 J/cm² @Temperature 23.0 °C |
1.19 ft-lb/in² @Temperature 73.4 °F |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 222 °C | 432 °F | |
Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C | 140 °F | |
Vicat Softening Point | 200 °C | 392 °F | B |
Flammability, UL94 | V-0 | V-0 | |
Glow Wire Test | 960 °C | 1760 °F |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | |
Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | |
Comparative Tracking Index | 500 V | 500 V |
Processing Properties | Metric | English | Comments |
---|---|---|---|
Melt Temperature | 230 - 250 °C | 446 - 482 °F | |
Mold Temperature | 30.0 - 50.0 °C | 86.0 - 122 °F | |
Drying Temperature | 80.0 °C | 176 °F | |
Dry Time | 4 hour | 4 hour | |
Moisture Content | 0.20 % | 0.20 % | |
Injection Pressure | 70.0 - 100 MPa | 10200 - 14500 psi |