POLYMER SEARCH

Nilit Nilamid A3 H6 G5 25% Glass Reinforced PA66

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled
Manufacturer	Nilit
Trade Name	Nilamid
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Nilit Nilamid A3 H6 G5 25% Glass Reinforced PA66.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Nilamid A3 H6 G5 is a 25% glass fiber reinforced NYLON 66 with a special stabilization system against hot oil and grease. As a result of this stabilization, the material has a brown natural color. It is used for applications which run in hot mineral oil, such as bearing cages, cam shafts and couplings. Because this material also demonstrates good hot air heat stability and has a low ionic content, it is also used for electrical applications such as bobbins.Key characteristics: Excellent heat stability and stability against hot oil and greaseGood overall mechanical performance up to 150°CBrown natural colorEasy processingInformation provided by NILIT.

Physical Properties	Metric	English	Comments
Density	1.32 g/cc	0.0477 lb/in³	ASTM D792, ISO 1183
Water Absorption	0.80 %	0.80 %	23°C, 24h in H<sub>2</sub>O; sim. ISO 62
Water Absorption at Saturation	5.5 %	5.5 %	sim. ISO 62
Linear Mold Shrinkage, Flow	0.0035 cm/cm	0.0035 in/in	Euronil
Linear Mold Shrinkage, Transverse	0.0055 cm/cm	0.0055 in/in	Euronil

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	150 MPa	21800 psi	ISO 527, ASTM D638
Elongation at Break	3.0 %	3.0 %	ISO 527, ASTM D638
Flexural Yield Strength	230 MPa	33400 psi	ISO 178, ASTM D790
Flexural Modulus	7.80 GPa	1130 ksi	ISO 178, ASTM D790
	4.50 GPa @Temperature 90.0 °C	653 ksi @Temperature 194 °F	ISO 178, ASTM D790
Izod Impact, Notched (ISO)	8.00 kJ/m² @Temperature 23.0 °C	3.81 ft-lb/in² @Temperature 73.4 °F	ISO 180/1A
Charpy Impact Unnotched	4.80 J/cm²	22.8 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.900 J/cm²	4.28 ft-lb/in²	ISO 179

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	130 °C	266 °F	20,000 hr; IEC 216
Deflection Temperature at 0.46 MPa (66 psi)	255 °C	491 °F	ISO 75, ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	248 °C	478 °F	ISO 75, ASTM D648
Vicat Softening Point	250 °C	482 °F	49 N; ISO 306, ASTM D1525
	255 °C	491 °F	9.8 N; ISO 306, ASTM D1525
Flammability, UL94	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in
	HB @Thickness 3.20 mm	HB @Thickness 0.126 in
Oxygen Index	24 %	24 %	ASTM D2863
Glow Wire Test	650 °C @Thickness 0.800 mm	1200 °F @Thickness 0.0315 in	Glow Wire Flammability Index; IEC 694-2-12
	650 °C @Thickness 3.20 mm	1200 °F @Thickness 0.126 in	Glow Wire Flammability Index; IEC 694-2-12

Electrical Properties	Metric	English	Comments
Dielectric Strength	20.0 kV/mm @Thickness 2.00 mm	508 kV/in @Thickness 0.0787 in	ASTM D149
Comparative Tracking Index	350 V @Thickness 3.20 mm	350 V @Thickness 0.126 in	Sol. B; IEC 112, UL 746A
	500 V @Thickness 3.20 mm	500 V @Thickness 0.126 in	Sol. A; IEC 112, UL 746A

Processing Properties	Metric	English	Comments
Nozzle Temperature	280 - 295 °C	536 - 563 °F
Zone 1	270 - 290 °C	518 - 554 °F	hopper
Zone 2	275 - 290 °C	527 - 554 °F
Zone 3	280 - 295 °C	536 - 563 °F
Zone 4	280 - 295 °C	536 - 563 °F
Melt Temperature	275 - 300 °C	527 - 572 °F	Do not melt above 300°C
Mold Temperature	90.0 - 110 °C	194 - 230 °F	Preferred
Drying Temperature	80.0 - 85.0 °C	176 - 185 °F
Dry Time	4 hour	4 hour
Injection Pressure	70.0 - 100 MPa	10200 - 14500 psi

Descriptive Properties	Value	Comments
Clamping Force	in tons, 0.7 times the projected surface area in cm²
Heat Resistance - Ball Test	OK	at 125°C, IEC 309
	OK	at 165°C, IEC 309
Holding Pressure	90 Mpa

Users viewing this material also viewed the following: