- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nilit FRIANYL A63 CU90 Nylon 6.6 for injection molding, 90% copper filled
Nilit FRIANYL A63 CU90 Nylon 6.6 for injection molding, 90% copper filled
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 |
| Manufacturer | Nilit (formerly Frisetta Polymer) |
| Trade Name | FRIANYL |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Nilit FRIANYL A63 CU90 Nylon 6.6 for injection molding, 90% copper filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Nylon 6.6 for injection moldingInformation provided by Frisetta Polymer, which merged into Nilit Plastics
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 4.50 g/cc | 0.163 lb/in³ | ISO 1183 |
| Water Absorption | 0.30 - 0.60 % | 0.30 - 0.60 % | ISO 62 |
| Water Absorption at Saturation | 2.0 - 3.0 % | 2.0 - 3.0 % | ISO 62 |
| Viscosity Measurement | 145 | 145 | Viscosity index; ISO 307 |
| Linear Mold Shrinkage | 0.0020 - 0.0070 cm/cm | 0.0020 - 0.0070 in/in | FRISETTA Test Method |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Ball Indentation Hardness | 130 MPa | 18900 psi | ISO 2039-1 |
| Tensile Strength at Break | 18.0 MPa | 2610 psi | ISO 527 |
| Elongation at Break | 15 % | 15 % | ISO 527 |
| Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527 |
| Flexural Strength | 35.0 MPa | 5080 psi | ISO 178 |
| Flexural Modulus | 4.20 GPa | 609 ksi | ISO 178 |
| Charpy Impact Unnotched | 1.80 J/cm² | 8.57 ft-lb/in² | DIN 53453 |
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | DIN 53453 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 256 °C | 493 °F | ISO 3146 DSC |
| Maximum Service Temperature, Air | 180 °C | 356 °F | Continuous; FRISETTA Test Method |
| Deflection Temperature at 0.46 MPa (66 psi) | 225 °C | 437 °F | ISO 75 |
| Deflection Temperature at 1.8 MPa (264 psi) | 220 °C | 428 °F | ISO 75 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+9 ohm-cm | 1.00e+9 ohm-cm | IEC 93 |
| Dissipation Factor | 0.020 @Frequency 1e+6 Hz |
0.020 @Frequency 1e+6 Hz |
IEC 250 |
Users viewing this material also viewed the following:
- PolyOne Edgetek® CY-10GF/000 UV FR V0 NATURAL PC/ABS Blend, Glass Filled (discontinued **)
- DuPont Elvaloy® 2615 AC Ethylene and 15% Ethyl Acrylate Copolymer
- Daikin NEOFLON AP-221SH PFA Semiconductor Grade
- Daikin POLYFLON MG-1431 PTFE 15% Glass Fiber and 5% MoS2 Filled Molding Powder
- Diamond Polymers DIAMALOY 800 Polycarbonate/Polyester Alloy
- Dow DOWLEX™ 2070G Linear Low Density Polyethylene
- Dow SiLK™ I 550 Semiconductor Dielectric Resin
- EMS-Grivory Grivory® HT1V-4 FWA black 9225 PA6T/6I-GF40
- Fainplast Compounds PK 77/K-FR Flexible PVC, Lead Free
Copyright © lookpolymers.com All Rights Reserved