- HOME
- POLYMER SEARCH
- Thermoplastic
- Polylactic Acid (PLA) Biopolymer
- NatureWorks® Ingeo™ 6400D Fiber Grade PLA
NatureWorks® Ingeo™ 6400D Fiber Grade PLA
| Category | Polymer , Renewable/Recycled Polymer , Thermoplastic , Polylactic Acid (PLA) Biopolymer |
| Manufacturer | NatureWorks LLC |
| Trade Name | Ingeo™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | NatureWorks® Ingeo™ 6400D Fiber Grade PLA.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
NatureWorks® PLA polymer 6400D is a thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6400D is designed for extrusion into mechanically drawn continuous filament using conventional fiber spinning and drawing equipment. 6400D is typically well suited for fiber that is processed into bulk continuous filament (BCF), which is typically used in the manufacturing of carpet. NatureWorks® PLA 6400D can be converted into BCF using a one step spin-draw process.Applications: Bulk continuous filament; Tufted carpet – loop pile; Tufted carpet – cut pile; Broad loom carpet; Carpet mats
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.24 g/cc | 1.24 g/cc | ASTM D792 |
| Melt Density | 1.08 g/cc @Temperature 230 °C |
0.0390 lb/in³ @Temperature 446 °F |
ASTM D1238 |
| Viscosity Measurement | 4.0 | 4.0 | Relative Viscosity; CD Internal Viscotek Method |
| Melt Flow | 4.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 210 °C |
4.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 410 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Elongation at Break | 35 - 45 % | 35 - 45 % | Fiber; ASTM D2256/ASTM D3822 |
| Tenacity | 0.177 - 0.212 N/tex | 2.00 - 2.40 g/denier | ASTM D2256/ASTM D3822 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 160 - 170 °C | 320 - 338 °F | ASTM D3418 |
| Glass Transition Temp, Tg | 55.0 - 60.0 °C | 131 - 140 °F | ASTM D3417 |
| Shrinkage | 15 - 20 % | 15 - 20 % | Boiling Water, Bulk heat set; ASTM D2102 |
| 25 - 35 % | 25 - 35 % | Boiling Water, Bulk non-heat set; ASTM D2102 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Drying Temperature | 80.0 °C @Time 14400 sec |
176 °F @Time 4.00 hour |
|
| Dew Point | -35.0 °C | -31.0 °F | |
| Drying Air Flow Rate | >= 14.2 l/min | >= 0.500 ft³/min (CFM) |
Users viewing this material also viewed the following:
- Lehmann & Voss LUVOCOM® 1105-8065 PEEK, with carbon fiber
- MarkeTech 95-3-2 Tungsten Alloy, AMS-T-21014 Class 3
- Heatbath/Park #800 High Speed Hardening Salt
- TIMET TIMETAL® 6-2-4-6 Titanium Alloy (Ti-6Al-2Sn-4Zr-6Mo), Typical
- Diamond Polymers ASA TWP 155
- Axion Polymers Axplas® PS07 0000 General Purpose Polystyrene
- 3M Scotchcal™ ElectroCut™ 7125-41 Graphic Film
- Polimeri Europa Extir® IA 3000 Expandable Polystyrene, Special Purpose (discontinued **)
Copyright © lookpolymers.com All Rights Reserved