Murtfeldt Murylon® A GF Nylon 66, Glass Reinforced

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Glass Reinforced, Impact Grade
Manufacturer	Murtfeldt Kunststoffe GmbH & Co
Trade Name	Murylon®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Murtfeldt Murylon® A GF Nylon 66, Glass Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Murylon® A’s impressive characteristics are enhanced with admixed glass fibers. This results in a clear improvement in cold flow behavior and dimensional stability, enabling higher static pressure loads to be endured.Special Properties:• Improved compressive strength• Excellent cold flow behavior• Increased rigidity• Excellent dimensional stability• Low moisture absorptionInformation provided by Murtfeldt Kunststoffe GmbH & Co. KG.

Physical Properties	Metric	English	Comments
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	1.7 % @Temperature 23.0 °C	1.7 % @Temperature 73.4 °F	50% RH
Water Absorption at Saturation	5.5 % @Temperature 23.0 °C	5.5 % @Temperature 73.4 °F

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	76	76	dry; ISO 2039-2
Hardness, Shore D	82	82	DIN 53505
Ball Indentation Hardness	165 MPa	23900 psi	dry; ISO 2039-1
Tensile Strength at Break	100 MPa	14500 psi	dry; ISO 527-1
	100 MPa	14500 psi	50% RH; ISO 527-1
Elongation at Break	5.0 %	5.0 %	dry; ISO 527-1
	12 %	12 %	50% RH; ISO 527-1
Creep Strength	18.0 MPa @Time 3.60e+6 sec	2610 psi @Time 1000 hour	stress leading to 1% elongation; 50% RH; ISO 899-1
	26.0 MPa @Time 3.60e+6 sec	3770 psi @Time 1000 hour	stress leading to 1% elongation; dry; ISO 899-1
Modulus of Elasticity	3.20 GPa	464 ksi	50% RH
	5.90 GPa	856 ksi	dry
Compressive Yield Strength	28.0 MPa @Strain 1.00 %	4060 psi @Strain 1.00 %	dry; ISO 604
	55.0 MPa @Strain 2.00 %	7980 psi @Strain 2.00 %	dry; ISO 604
	90.0 MPa @Strain 5.00 %	13100 psi @Strain 5.00 %	dry; ISO 604
Charpy Impact Unnotched	5.00 J/cm²	23.8 ft-lb/in²	dry; ISO 179-1/1eU
	>= 5.00 J/cm²	>= 23.8 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.600 J/cm²	2.86 ft-lb/in²	dry; ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.35	0.35
Sand Slurry	0.28	0.28	µm/km

Thermal Properties	Metric	English	Comments
CTE, linear	50.0 µm/m-°C @Temperature 23.0 - 60.0 °C	27.8 µin/in-°F @Temperature 73.4 - 140 °F
	60.0 µm/m-°C @Temperature 23.0 - 100 °C	33.3 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F
Melting Point	260 °C	500 °F	ISO 11357-1
Maximum Service Temperature, Air	110 °C @Time 7.20e+7 sec	230 °F @Time 20000 hour
	120 °C @Time 1.80e+7 sec	248 °F @Time 5000 hour
	200 °C @Time <=86400 sec	392 °F @Time <=24.0 hour
Minimum Service Temperature, Air	-20.0 °C	-4.00 °F
Glass Transition Temp, Tg	60.0 °C	140 °F	ISO 11357-1
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Electrical Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	50% RH; IEC 60093
	>= 1.00e+14 ohm-cm	>= 1.00e+14 ohm-cm	dry; IEC 60093
Surface Resistance	>= 1.00e+12 ohm	>= 1.00e+12 ohm	50% RH; IEC 60093
	>= 1.00e+13 ohm	>= 1.00e+13 ohm	dry; IEC 60093
Dielectric Constant	3.6 @Frequency 1.00e+6 Hz	3.6 @Frequency 1.00e+6 Hz	dry; IEC 60250
	3.90 @Frequency 1.00e+6 Hz	3.90 @Frequency 1.00e+6 Hz	50% RH; IEC 60250
	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz	dry; IEC 60250
	6.9 @Frequency 100 Hz	6.9 @Frequency 100 Hz	50% RH; IEC 60250
Dielectric Strength	20.0 kV/mm	508 kV/in	50% RH; IEC 60243-1
	30.0 kV/mm	762 kV/in	dry; IEC 60243-1
Dielectric Loss Index	0.012 @Frequency 100 Hz	0.012 @Frequency 100 Hz	dry; IEC 60250
	0.014 @Frequency 1.00e+6 Hz	0.014 @Frequency 1.00e+6 Hz	dry; IEC 60250
	0.040 @Frequency 1.00e+6 Hz	0.040 @Frequency 1.00e+6 Hz	50% RH; IEC 60250
	0.19 @Frequency 100 Hz	0.19 @Frequency 100 Hz	50% RH; IEC 60250

Compliance Properties	Metric	English	Comments
FDA	Yes	Yes

Descriptive Properties	Value	Comments
Color	Black

Users viewing this material also viewed the following: