- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Olefinic Elastomer (TPO)
- Multibase Multi-Flex® TPO D 5308 BLK
Multibase Multi-Flex® TPO D 5308 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Olefinic Elastomer (TPO) |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPO |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPO D 5308 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D792-91 |
| Linear Mold Shrinkage | 0.013 cm/cm | 0.013 in/in | ASTM D955-89 |
| Melt Flow | 8.0 g/10 min | 8.0 g/10 min | (Condition L) ASTM D-1238-94a |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 58 | 58 | 10 sec; ASTM D-2240-95 |
| Tensile Strength, Ultimate | 10.0 MPa | 1450 psi | ASTM D638-95 |
| Elongation at Break | >= 350 % | >= 350 % | ASTM D638-95 |
| Elongation at Yield | 22 % | 22 % | ASTM D638-95 |
| Flexural Modulus | 0.548 GPa | 79.5 ksi | Secant 1%; ASTM D-790-95 |
| Izod Impact, Notched | NB | NB | ASTM D-256-93a |
| Tear Strength | 98.0 kN/m | 559 pli | ASTM D624-95 |
Users viewing this material also viewed the following:
- FloMet Fe-42% Ni Controlled Expansion Alloy
- Gouda Vuurvast ADHESIET 160 SP Dry Air-Setting Refractory Mortar
- Haysite 18600 Polyester BMC, 15% Glass Reinforced
- Styron DL264PA Carboxylated SB
- DuPont Elvax® 3180Z Ethylene Vinyl Acetate
- Dow Corning Z-2306 SILANE
- Daikin POLYFLON MG-1030F PTFE 15% Glass Fiber Filled Molding Powder, High Apparent Density, Free Flow
- BASF Styropor® BFL 222 EPS
- BASF Ultramid® C40 LN 01 PA6/66
- SABIC Innovative Plastics LNP VERTON RV00CESS PA 66
Copyright © lookpolymers.com All Rights Reserved