Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D1505 |
PolyOne Syncure™ S1010B Polyethylene, Crosslinked (XLPE) Available as Catalyst Masterbatch component for PolyOne Syncure System.Oven Aging values are >75, and were measured on a 95 phr S1025A / 5 phr S1010B Syncure System. Pellet appearance is 1/8 cylindr.. |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | load density; ASTM D1505 |
SABIC 120W Linear Low Density Polyethylene for Blown Film Product Description: 120W is a Linear Low Density Polyethylene grade suitable for general purpose packaging. Films produced using this resin yield good tensile properties, impact strength and opti.. |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | ASTM D792 |
NOVA Chemicals Novapol® 20% LF-0718-A in PF-0118-B LDPE Film Resin Improves gloss and reduces haze in blends with LLDPE, Improves melt strength and increases output in blends with LLDPEApplications: Blends with LLDPEAdditives: Base resinFilm properties are typical .. |
|||
Density | 0.919 g/cc | 0.0332 lb/in³ | ASTM D792 |
NOVA Chemicals Novapol® LA-0219-AM LDPE Foam Resin Good heat sealing latitude, Moderate toughness, Easy processabilityApplications: Industrial packaging, Liners, Blends with LLDPE, Foam articlesAdditives: Base resinFilm properties are typical of blo.. |
|||
Density | 0.919 g/cc | 0.0332 lb/in³ | ASTM D792 |
NOVA Chemicals Novapol® LF-0219-D LDPE Film Resin Film Properties. Features: Good heat sealing latitude, moderate toughness, easy processability.Applications: Liners, industrial packaging, blends with LLDPE.Data provided by the manufacturer. |
|||
Density | 0.919 g/cc | 0.0332 lb/in³ | ASTM D 792 |
NOVA Chemicals Sclair® FP619-A Octene Copolymer LLDPE Film Resin FP619-A complies with the U.S. FDA specifications for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food, withou.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D1505 |
Chevron Phillips 6120 LLDPE Cast/Blown Film Resin, Butene Copolymer
(discontinued **) Resin Type: Butene CopolymerCharacteristics: Good Stiffness at Thin Gauges, Good Optics, Good Drawdown, Can be used straight or blended with LDPE or HDPE, Can be used in blown or cast applicationsAp.. |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | |
DuPont™ Sclairfilm® LX-1 LLDPE Film, Laminating, 76.2 µm Thickness
(discontinued **) Data provided by DuPont Packaging Polymers.A linear low density polyethylene film with an outstanding combination of toughness and durability. LX has superior tensile strength, puncture strength, e.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | |
DuPont™ Sclairfilm® GL-1 LLDPE Film, Laminating, 76 µm Thickness
(discontinued **) Data provided by DuPont Packaging Polymers.A general purpose linear low density polyethylene sealant film designed for less critical sealing applications than type SL. It provides good heat seal an.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D792 |
NOVA Chemicals Novapol® LE-0520-A LDPE Extrusion Resin
(discontinued **) Features: easy processing, good dispersion.Applications: Additive and color concentrates for film and molding.Data provided by the manufacturer. |
|||
Density | 0.919 g/cc | 0.0332 lb/in³ | ASTM D 792 |
NOVA Chemicals Novapol® PF-0318-E Butene LLDPE Film Resin PF-0318-E complies with the U.S. FDA specifications for olefin polymers and may be used in the U.S. as an article or component of an article intended for use in contact with food. It is also biolog.. |
|||
Density | 0.920 - 1.66 g/cc | 0.0332 - 0.0600 lb/in³ | Average value: 1.35 g/cc Grade Count:109 |
Overview of materials for Nylon 6, Glass Bead Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Glass Bead Filled". Each property range of values reported is minimum and maximum values of app.. |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | ASTM D1505 |
LyondellBasell Petrothene® NA204000 Low Density Polyethylene ApplicationsPETROTHENE NA 204-000 is a general-purpose resin recommended for intermediate and light-weight coating applications at high speeds. NA 204-000 can be drawn down to weights of 2.0 lb/rea.. |
|||
Density | 0.919 g/cc | 0.0332 lb/in³ | ASTM D1505 |
LyondellBasell Petrothene® NA951000 Low Density Polyethylene ApplicationsPETROTHENE NA 951 is a series of homopolymer resins specially designed for industrial and consumer packaging and liner and bag applications. NA 951 has an excellent balance of processab.. |
|||
Density | 0.919 g/cc | 0.0332 lb/in³ | ASTM D1505 |
LyondellBasell Petrothene® NA963083 Low Density Polyethylene ApplicationsPETROTHENE NA 963 is a series of resins formulated with special antiblock additive and designed for a wide variety of industrial film applications where high impact strength and excellen.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D1505 |
Lushan M-10H Adhesive Resin for Multi-layer Sausage Casing film Adhesive resin Lushan series for sausages casing film is anhydride-modified polyethylene product and is available in pellet form. Adhesive resin Lushan series for sausages casing film is designed fo.. |
|||
Density | 0.920 - 0.940 g/cc | 0.0332 - 0.0340 lb/in³ | ASTM D 792 |
Cossa Polimeri ESTALENE EN 10 EC Modified Polyolefin Blend Formulated for injection molding or extrusion of synthetic corksCertified according to FDA standardsInformation provided by Cossa Polimeri S.r.l. |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | ASTM D1505 |
Chevron Phillips MarFlex® D139FK Metallocene Linear Low Density Polyethylene, Blown Film This mLLDPE is tailored for applications that require:Excellent clarityExcellent glossExcellent toughnessExcellent heat sealTypical blown film applications include:Seal layer in coextrusionsHeavy du.. |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | ExxonMobil method |
ExxonMobil Exceed™ 1518HA Metallocene Polyethylene Resin Product Description: Exceed 1518HA is a metallocene ethylene-hexene copolymer. Films made from Exceed 1518HA have outstanding tensile, impact strength and puncture. These superior strength propertie.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | |
Dow DOWLEX™ 2045.02AC Linear Low Density Polyethylene, Blown Film Grade DOWLEX® 2045.02AC Polyethylene resin is a high stability blown film extrusion resin that provides excellent tear strength and outstanding toughness. It contains high level of slip additive and medi.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D792 |
Dow DOWLEX™ 2045G Linear Low Density Polyethylene DOWLEX™ 2045G resin is designed for the production of a wide variety of industrial and consumer films (though it is not recommended for silage stretch film). The product also delivers very good pr.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | |
Dow DOWLEX™ 2245A Linear Low Density Polyethylene, Heavy Duty Film Grade DOWLEX® 2245A Polyethylene resin is a premier film resin for heavy duty applications. DOWLEX 2245A resin is used where improved thermal stability over a broad range of processing conditions is nece.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | natural resin; ASTM D792 |
Dow FINGERPRINT™ DFDA-7510 NT Linear Low Density Polyethylene Resin FINGERPRINT™ DFDA-7510 NT resin is produced using UNIPOL™ process technology. It is intended for use in micro irrigation tube, durable hose and tube, profile extrusion, and injection molded fitti.. |
|||
Density | 0.919 g/cc | 0.0332 lb/in³ | ASTM-D792 |
Braskem FM31D LLDPE Blown Film Extrusion Polyethylene Copolymer The FM31D resin is a linear low-density polyethylene, copolymer of butene-1, produced by the solution process for blown film extrusion. It has excellent mechanical properties, especially hot tack. I.. |
|||
Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D792 |
Aclo Accutech Polypropylene Copolymer CP0436C10L Calcium Reinforced |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | ASTM-D1505 |
Braskem LL318 LLDPE Linear Low Density Extrusion Polyethylene LL318 is a linear low-density polyethylene, copolymer of butene-1, produced by the Spherilene process. It was developed for cast film extrusion. Films obtained with this product show good mechanical.. |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | ASTM D-792 |
Bapolene® 1057EC Low Density Polyethylene Extrusion Coating Bapolene 1057EC is a low density polyethylene for high speed extrusion coating applications that require superior adhesion and neck-in. It complies with US FDA 21 CFR 177.1520.Applications: Pouches.. |
|||
Density | 0.918 g/cc | 0.0332 lb/in³ | ISO 1183-A |
Carmel Olefins IPETHENE® 810 Low Density Polyethylene IPETHENE® 810 is a low density polyethylene injection molding grade. It exhibits high melt flow rate, high gloss, and high stiffness. APPLICATIONS IPETHENE® 810 is used to produce lids, containe.. |
|||
Density | 0.919 g/cc | 0.0332 lb/in³ | ASTM D1505 |
Huntsman PE6014 Blow Molding Polyethylene
(discontinued **) Homopolymer, Drug Master File listed product, complies with USP Classification VI, and FDA compliant.Features: Meets exacting requirements of blow molded containers and processes well with parison s.. |
|||
Density | 0.920 - 1.20 g/cc | 0.0332 - 0.0434 lb/in³ | Average value: 0.987 g/cc Grade Count:123 |
Overview of materials for Polypropylene with 10% Talc Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 10% Talc Filler". Specific grades with primary filler content between 5% and 14% are .. |