- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyolefin
- Multibase Multi-Flex® D 6606 TPO Thermoplastic Polyolefin Elastomer
Multibase Multi-Flex® D 6606 TPO Thermoplastic Polyolefin Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyolefin |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® D 6606 TPO Thermoplastic Polyolefin Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features: Chemical Resistance, Good PaintableOzone ResistantDensity, LowTear Strength, GoodUV Resistance, GoodStiffness, Good Forms:PelletsUses: Automotive ApplicationsInformation provided by Multibase
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.18 g/cc | 1.18 g/cc | ASTM 792 |
| Linear Mold Shrinkage | 0.014 cm/cm | 0.014 in/in | ASTM D955 |
| Melt Flow | 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 66 | 66 | 10 seconds; ASTM D2240 |
| Tensile Strength, Yield | 15.2 MPa | 2200 psi | Elastic; ASTM D638 |
| Elongation at Break | 150 % | 150 % | ASTM D638 |
| Flexural Modulus | 1.17 GPa | 170 ksi | ASTM D790 |
| Tear Strength | 92.9 kN/m | 530 pli | ASTM D624 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 177 - 199 °C | 350 - 390 °F | |
| Middle Barrel Temperature | 199 - 221 °C | 390 - 430 °F | |
| Front Barrel Temperature | 221 - 232 °C | 430 - 450 °F | |
| Nozzle Temperature | 6.11 - 232 °C | 43.0 - 450 °F | |
| Melt Temperature | 232 °C | 450 °F | |
| Mold Temperature | 37.8 °C | 100 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Clamp Tonnage | 2-4 tons/in2 | |
| Screw L/D Ratio | 20:1 |
Users viewing this material also viewed the following:
- Solvay Specialty Polymers Amodel® AP-9240 NL Polyphthalamide (PPA) Resin, 40% Mineral Filled, Dry as Molded (
- Nitriflex N-7 NBR - Nitrile Rubber
- LG Chemical EM500 Impact modifier for Engineering Plastics
- Kinlead HSS13 Normal Grade Heat Sealable Film (thickness: 18 µm)
- Solvay Specialty Polymers Veradel® A-702 Polyethersulfone (PESU)
- Universal Wire Works Nichrome V (coating alloy) (AMS 5682) Nickel Alloy Filler Metal
- A. Schulman POLYBATCH™ Cedar 10310U Concentrate Based In LLDPE
- Zylog Hipolyene® 8025 HC Thermoplastic Polyolefin & PP Compound
- Arkema Group Rilsan® AZM 30 NOIR T6LD Nylon 12, 30% Glass Fiber Filled (Dry)
Copyright © lookpolymers.com All Rights Reserved