- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Mitsui Arlenâ„¢ CH230N 30% Glass Fiber-Reinforced Modified Nylon 6T, Flame Retardant (DAM)
Mitsui Arlenâ„¢ CH230N 30% Glass Fiber-Reinforced Modified Nylon 6T, Flame Retardant (DAM)
| Category | Polymer , Thermoplastic , Nylon |
| Manufacturer | Mitsui Chemicals America |
| Trade Name | Arlen™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Mitsui Arlenâ„¢ CH230N 30% Glass Fiber-Reinforced Modified Nylon 6T, Flame Retardant (DAM).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ARLEN™ is a heat resistant, modified polyamide 6T developed by Mitsui Chemicals, Inc. With a high melting point (320°C) and a rigidity level comparable to super engineering plastics, it possesses strong dimensional stability and chemical resistance. In addition, the effect of water absorption, which is a traditional weakness of polyamides, has been reduced to a minimum.Applications: ConnectorsJacksSwitchesPower supply terminalsVarious casesInformation provided by Mitsui.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.63 g/cc | 0.0589 lb/in³ | ASTM D792 |
| Filler Content | 30 % | 30 % | |
| Water Absorption | 0.30 % @Thickness 2.00 mm |
0.30 % @Thickness 0.0787 in |
24 hours in 23°C water; ASTM D570 |
| 3.0 % @Thickness 2.00 mm |
3.0 % @Thickness 0.0787 in |
24 hours in 100°C water; ASTM D570 | |
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm @Thickness 2.00 mm |
0.0040 in/in @Thickness 0.0787 in |
ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm @Thickness 2.00 mm |
0.0080 in/in @Thickness 0.0787 in |
Vertical Direction; ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 95 | 95 | ASTM D785 |
| Tensile Strength at Break | 160 MPa | 23200 psi | ASTM D638 |
| Elongation at Break | 4.0 % | 4.0 % | Measured between the chucks; ASTM D638 |
| Flexural Strength | 240 MPa | 34800 psi | ASTM D790 |
| Flexural Modulus | 11.0 GPa | 1600 ksi | ASTM D790 |
| Izod Impact, Notched | 0.800 J/cm | 1.50 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 60.0 µm/m-°C @Temperature 20.0 °C |
33.3 µin/in-°F @Temperature 68.0 °F |
Vertical Direction; ASTM D696 |
| CTE, linear, Parallel to Flow | 30.0 µm/m-°C @Temperature 20.0 °C |
16.7 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Melting Point | 310 °C | 590 °F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 290 °C | 554 °F | ASTM D648 |
| Glass Transition Temp, Tg | 85.0 °C | 185 °F | |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.0 @Frequency 1e+6 Hz |
4.0 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 25.0 kV/mm | 635 kV/in | ASTM D149 |
| Dissipation Factor | 0.013 @Frequency 1e+6 Hz |
0.013 @Frequency 1e+6 Hz |
ASTM D150 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 50.0 - 90.0 °C | 122 - 194 °F | Hopper Bottom Temp for Mechanical and Structural Standard Molding |
| 50.0 - 90.0 °C | 122 - 194 °F | Hopper Bottom for Electronic and Electric Standard Molding | |
| Nozzle Temperature | 315 - 335 °C | 599 - 635 °F | NH Cylinder Temp for Electronic and Electric Standard Molding |
| 325 - 340 °C | 617 - 644 °F | NH Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 1 | 300 - 325 °C | 572 - 617 °F | C1 Cylinder Temp for Electronic and Electric Standard Molding |
| 315 - 330 °C | 599 - 626 °F | C1 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 2 | 315 - 335 °C | 599 - 635 °F | C2 Cylinder Temp for Electronic and Electric Standard Molding |
| 320 - 335 °C | 608 - 635 °F | C2 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 3 | 320 - 335 °C | 608 - 635 °F | C3 Cylinder Temp for Electronic and Electric Standard Molding |
| 325 - 340 °C | 617 - 644 °F | C3 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Mold Temperature | 90.0 - 140 °C | 194 - 284 °F | for Electronic and Electric Standard Molding |
| 90.0 - 140 °C | 194 - 284 °F | for Mechanical and Structural Standard Molding | |
| Screw Speed | 150 rpm | 150 rpm | for Mechanical and Structural Standard Molding |
| 150 rpm | 150 rpm | for Electronic and Electric Standard Molding |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Injection Pressure | Medium | Electronic and Electric Standard Molding |
| Medium | Mechanical and Structural Standard Molding | |
| Injection Speed | Medium | Electronic and Electric Standard Molding |
| Medium | Mechanical and Structural Standard Molding |
Users viewing this material also viewed the following:
- Okulen® 2000 PE-UHMW, DryRun
- SABIC Innovative Plastics Lexan® HP4REU PC (Europe-Africa-Middle East)
- Karina E 839-10/158-CR White PVC Compound
- Sharadaa Ceramics REFCAST K High Alumina Castables
- ExxonMobil Paxon™ AD60-005 Blow Molding Resin
- Dow LDPE 959I Low Density Polyethylene
- Barlog Plastics KEBAFLEX SG 50 A.1 black TPE-S, Shore A50, black
Copyright © lookpolymers.com All Rights Reserved