- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Mitsui Arlenâ„¢ A350 50% Glass Fiber-Reinforced Modified Nylon 6T (DAM)
Mitsui Arlenâ„¢ A350 50% Glass Fiber-Reinforced Modified Nylon 6T (DAM)
| Category | Polymer , Thermoplastic , Nylon |
| Manufacturer | Mitsui Chemicals America |
| Trade Name | Arlen™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Mitsui Arlenâ„¢ A350 50% Glass Fiber-Reinforced Modified Nylon 6T (DAM).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ARLEN™ is a heat resistant, modified polyamide 6T developed by Mitsui Chemicals, Inc. With a high melting point (320°C) and a rigidity level comparable to super engineering plastics, it possesses strong dimensional stability and chemical resistance. In addition, the effect of water absorption, which is a traditional weakness of polyamides, has been reduced to a minimum.Applications: Cylinder head coversThermostat casesOil pump housingsHydraulic system pistonsCooling system partsRoller/pulley partsInformation provided by Mitsui.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.63 g/cc | 0.0589 lb/in³ | ASTM D792 |
| Filler Content | 50 % | 50 % | |
| Water Absorption | 0.20 % @Thickness 2.00 mm |
0.20 % @Thickness 0.0787 in |
24 hours in 23°C water; ASTM D570 |
| 1.2 % @Thickness 2.00 mm |
1.2 % @Thickness 0.0787 in |
24 hours in 100°C water; ASTM D570 | |
| Linear Mold Shrinkage, Flow | 0.0020 cm/cm @Thickness 2.00 mm |
0.0020 in/in @Thickness 0.0787 in |
ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0060 cm/cm @Thickness 2.00 mm |
0.0060 in/in @Thickness 0.0787 in |
Vertical Direction; ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 110 | 110 | ASTM D785 |
| Tensile Strength at Break | 300 MPa | 43500 psi | ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | Measured between the chucks; ASTM D638 |
| Flexural Strength | 430 MPa | 62400 psi | ASTM D790 |
| Flexural Modulus | 17.0 GPa | 2470 ksi | ASTM D790 |
| Izod Impact, Notched | 1.50 J/cm | 2.81 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 42.0 µm/m-°C @Temperature 20.0 °C |
23.3 µin/in-°F @Temperature 68.0 °F |
Vertical Direction; ASTM D696 |
| CTE, linear, Parallel to Flow | 18.0 µm/m-°C @Temperature 20.0 °C |
10.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Melting Point | 320 °C | 608 °F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 310 °C | 590 °F | ASTM D648 |
| Glass Transition Temp, Tg | 125 °C | 257 °F | |
| Flammability, UL94 | HB | HB | Equivalent |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.5 @Frequency 1e+6 Hz |
4.5 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 29.0 kV/mm | 737 kV/in | ASTM D149 |
| Dissipation Factor | 0.018 @Frequency 1e+6 Hz |
0.018 @Frequency 1e+6 Hz |
ASTM D150 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 50.0 - 90.0 °C | 122 - 194 °F | Hopper Bottom Temp for Mechanical and Structural Standard Molding |
| 50.0 - 90.0 °C | 122 - 194 °F | Hopper Bottom for Electronic and Electric Standard Molding | |
| Nozzle Temperature | 315 - 335 °C | 599 - 635 °F | NH Cylinder Temp for Electronic and Electric Standard Molding |
| 325 - 340 °C | 617 - 644 °F | NH Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 1 | 300 - 325 °C | 572 - 617 °F | C1 Cylinder Temp for Electronic and Electric Standard Molding |
| 315 - 330 °C | 599 - 626 °F | C1 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 2 | 315 - 335 °C | 599 - 635 °F | C2 Cylinder Temp for Electronic and Electric Standard Molding |
| 320 - 335 °C | 608 - 635 °F | C2 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 3 | 320 - 335 °C | 608 - 635 °F | C3 Cylinder Temp for Electronic and Electric Standard Molding |
| 325 - 340 °C | 617 - 644 °F | C3 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Mold Temperature | 90.0 - 140 °C | 194 - 284 °F | for Mechanical and Structural Standard Molding |
| 90.0 - 140 °C | 194 - 284 °F | for Electronic and Electric Standard Molding | |
| Screw Speed | 150 rpm | 150 rpm | for Mechanical and Structural Standard Molding |
| 150 rpm | 150 rpm | for Electronic and Electric Standard Molding |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Injection Pressure | Medium | Electronic and Electric Standard Molding |
| Medium | Mechanical and Structural Standard Molding | |
| Injection Speed | Medium | Electronic and Electric Standard Molding |
| Medium | Mechanical and Structural Standard Molding |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® LUX2910 PC (Asia Pacific)
- Iran Petrochemical (PCC) Arak 0410AA LLDPE (discontinued **)
- Ineos B50-35H-011 HDPE
- Karina E 70/236-DA-IS Clear PVC Compound
- Unipetrol PE HD LITEN® PL 10 HDPE
- Loctite® 3566 Rapid Flow Low Profile Underfill
- Teknor Apex Uniprene® UN-2533A Thermoplastic Vulcanizate
- Daikin NEOFLON M-300H PCTFE Granular Molding Powder
- Epoxy Technology EPO-TEK® B9021-6 Epoxy Paste
- ATG s.r.l. HNBR Hydrogenated Nitrile Butadiene Rubber
Copyright © lookpolymers.com All Rights Reserved