Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Lanxess Durethan® A 30 000000 Nylon 66

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced
Manufacturer Lanxess
Trade Name Durethan®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Lanxess Durethan® A 30 000000 Nylon 66.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
PA 66, standard injection molding grade, non-reinforced, very easy release, normal solidificationApplication Examples: terminal blocks, cable clips, bobbins, gearwheels
Physical Properties Metric English Comments
Density 1.14 g/cc
0.0412 lb/in³
ISO 1183
Water Absorption 8.5 %
8.5 %
Test Sim. to ISO 62
Moisture Absorption at Equilibrium 2.8 %
2.8 %
23°C/50% R.H.; Test Sim. to ISO 62
Viscosity Test 144 cm³/g
144 cm³/g
Viscosity number; ISO 307, 1157, 1628
Melt Flow 68 g/10 min

@Load 5.00 kg,
Temperature 270 °C
68 g/10 min

@Load 11.0 lb,
Temperature 518 °F
Calculated from MVR using melt density; ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength, Yield 55.0 MPa
7980 psi
Conditioned; ISO 527-1/-2
85.0 MPa
12300 psi
ISO 527-1/-2
Elongation at Break >= 50 %
>= 50 %
Nominal, Conditioned; ISO 527-1/-2
Elongation at Yield 4.5 %
4.5 %
ISO 527-1/-2
20 %
20 %
Conditioned; ISO 527-1/-2
Tensile Modulus 1.30 GPa
189 ksi
Conditioned; ISO 527-1/-2
3.20 GPa
464 ksi
ISO 527-1/-2
Charpy Impact Unnotched NB
NB
NB

@Temperature -30.0 °C
NB

@Temperature -22.0 °F
Conditioned; ISO 179/1eU
NB

@Temperature 23.0 °C
NB

@Temperature 73.4 °F
NB

@Temperature 23.0 °C
NB

@Temperature 73.4 °F
Conditioned; ISO 179/1eU
Charpy Impact, Notched <= 1.00 J/cm²

@Temperature -30.0 °C
<= 4.76 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eA
<= 1.00 J/cm²

@Temperature -30.0 °C
<= 4.76 ft-lb/in²

@Temperature -22.0 °F
Conditioned; ISO 179/1eA
<= 1.00 J/cm²

@Temperature 23.0 °C
<= 4.76 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eA
2.00 J/cm²

@Temperature 23.0 °C
9.52 ft-lb/in²

@Temperature 73.4 °F
Conditioned; ISO 179/1eA
Puncture Energy 108 J
79.7 ft-lb
ISO 6603-2
19.0 J

@Temperature -30.0 °C
14.0 ft-lb

@Temperature -22.0 °F
ISO 6603-2
19.0 J

@Temperature -30.0 °C
14.0 ft-lb

@Temperature -22.0 °F
Conditioned; ISO 6603-2
Tensile Creep Modulus, 1 hour 1000 MPa
145000 psi
ISO 899-1
Tensile Creep Modulus, 1000 hours 700 MPa
102000 psi
ISO 899-1
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 90.0 µm/m-°C
50.0 µin/in-°F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 100 µm/m-°C
55.6 µin/in-°F
ISO 11359-1/-2
Melting Point 263 °C
505 °F
10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 225 °C
437 °F
ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 70.0 °C
158 °F
ISO 75-1/-2
Deflection Temperature at 8.0 MPa 50.0 °C
122 °F
ISO 75-1/-2
Vicat Softening Point 230 °C
446 °F
50°C/h 50N; ISO 306
Flammability, UL94 V-2

@Thickness 1.60 mm
V-2

@Thickness 0.0630 in
IEC 60695-11-10
V-2

@Thickness 3.20 mm
V-2

@Thickness 0.126 in
IEC 60695-11-10
Oxygen Index 27 %
27 %
ISO 4589-1/-2
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+12 ohm-cm
1.00e+12 ohm-cm
Conditioned; IEC 60093
1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093
Surface Resistance 1.00e+14 ohm
1.00e+14 ohm
IEC 60093
Dielectric Constant 3.4

@Frequency 1.00e+6 Hz
3.4

@Frequency 1.00e+6 Hz
IEC 60250
3.8

@Frequency 100 Hz
3.8

@Frequency 100 Hz
IEC 60250
4.0

@Frequency 1.00e+6 Hz
4.0

@Frequency 1.00e+6 Hz
Conditioned; IEC 60250
10

@Frequency 100 Hz
10

@Frequency 100 Hz
Conditioned; IEC 60250
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 60243-1
35.0 kV/mm
889 kV/in
Conditioned; IEC 60243-1
Dissipation Factor 0.0090

@Frequency 100 Hz
0.0090

@Frequency 100 Hz
IEC 60250
0.020

@Frequency 1.00e+6 Hz
0.020

@Frequency 1.00e+6 Hz
IEC 60250
0.090

@Frequency 1.00e+6 Hz
0.090

@Frequency 1.00e+6 Hz
Conditioned; IEC 60250
0.20

@Frequency 100 Hz
0.20

@Frequency 100 Hz
Conditioned; IEC 60250
Comparative Tracking Index 600 V
600 V
IEC 60112
Descriptive Properties Value Comments
Additives Release agent
Form Pellets
ISO Shortname ISO 1874-PA 66,MR,14-030
Processing Injection molding
Region Asia Pacific
Europe
Near East/Africa
North America
South and Central America
Copyright © lookpolymers.com All Rights Reserved