Kingfa FW-620 Flame Retardant ABS

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Unreinforced, Flame Retardant
Manufacturer	Kingfa Sci. & Tech. Co.
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Kingfa FW-620 Flame Retardant ABS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features:UL 94 V-0 @ 1.5-3.0mmWeather resistanceHeat resistanceGood surfaceApplications:Injection moldingOA deviceChargerTransformerInformation Provided by Kingfa Sci. & Tech. Co., Ltd.

Physical Properties	Metric	English	Comments
Specific Gravity	1.18 g/cc @Temperature 23.0 Â°C	1.18 g/cc @Temperature 73.4 Â°F	ASTM D792
Linear Mold Shrinkage	0.0040 - 0.0060 cm/cm @Temperature 23.0 Â°C	0.0040 - 0.0060 in/in @Temperature 73.4 Â°F	ASTM D955
Melt Flow	3.5 g/10 min @Load 5.00 kg, Temperature 200 Â°C	3.5 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ASTM D1238
	40 g/10 min @Load 10.0 kg, Temperature 220 Â°C	40 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	104	104	ASTM D785
Tensile Strength at Break	44.0 MPa	6380 psi	50mm/min; ASTM D638
Elongation at Break	10 %	10 %	50mm/min; ASTM D638
Flexural Strength	66.0 MPa	9570 psi	2mm/min; ASTM D790
Flexural Modulus	2.40 GPa	348 ksi	2mm/min; ASTM D790
Izod Impact, Notched	1.42 J/cm @Thickness 6.40 mm, Temperature 23.0 Â°C	2.66 ft-lb/in @Thickness 0.252 in, Temperature 73.4 Â°F	ASTM D256
	1.73 J/cm @Thickness 3.20 mm, Temperature 23.0 Â°C	3.24 ft-lb/in @Thickness 0.126 in, Temperature 73.4 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	90.0 Â°C @Thickness 6.40 mm	194 Â°F @Thickness 0.252 in	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	80.0 Â°C @Thickness 6.40 mm	176 Â°F @Thickness 0.252 in	ASTM D648
Vicat Softening Point	92.0 Â°C @Load 5.00 kg	198 Â°F @Load 11.0 lb	50Â°C/min; ASTM D1525
	103 Â°C @Load 1.00 kg	217 Â°F @Load 2.20 lb	120Â°C/min; ASTM D1525
Flammability, UL94	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in
	V-0 @Thickness 3.00 mm	V-0 @Thickness 0.118 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	ASTM D257
Dielectric Strength	22.0 kV/mm	559 kV/in	ASTM D149

Processing Properties	Metric	English	Comments
Processing Temperature	<= 245 Â°C	<= 473 Â°F
Rear Barrel Temperature	180 - 210 Â°C	356 - 410 Â°F	Start Point: 190Â°C
Middle Barrel Temperature	190 - 220 Â°C	374 - 428 Â°F	Start Point: 205Â°C
Front Barrel Temperature	200 - 230 Â°C	392 - 446 Â°F	Start Point: 215Â°C
Melt Temperature	200 - 230 Â°C	392 - 446 Â°F	Start Point: 220Â°C
Mold Temperature	30.0 - 60.0 Â°C	86.0 - 140 Â°F	Start Point: 50Â°C
Drying Temperature	70.0 - 80.0 Â°C @Time 7200 - 14400 sec	158 - 176 Â°F @Time 2.00 - 4.00 hour	Pre-dry
Back Pressure	0.000 - 1.00 MPa	0.000 - 145 psi

Descriptive Properties	Value	Comments
Injection Speed	Slow to Moderate
Weather Resistance (delta E)	ASTM D4459; 300hr

Users viewing this material also viewed the following: