POLYMER SEARCH

EMS-Grivory Grivory® XE 3959 nat PA610

Category	Polymer , Renewable/Recycled Polymer , Thermoplastic , Nylon , Nylon 610
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® XE 3959 nat PA610.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product description: Grilamid XE 3959 natural is a high viscosity Polyamide 610 especially suitable for extrusion applications. This PA610 product is to a large extent based on renewable raw materials and its eco-profile is very favourable when compared to similar products based on crude oil. The main features of Grilamid XE 3959 natural are: Low volume expansion of tubes under pressureGood cold impact behaviourHigh heat and chemical resistanceEasy processing Grilamid XE 3959 natural can be processed on standard tube-extrusion lines suitable for polyamides. Grilamid XE 3959 natural was specially developed for automotive tubing applications for which a high long term usage and peak temperature are required. Grilamid XE 3959 natural has an excellent volume expansion behaviour and is particularly suitable for hydraulic clutch tubes.Information provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/in³	ISO 1183
Water Absorption	3.3 %	3.3 %	ISO 62
Moisture Absorption	1.60 %	1.60 %	ISO 62
Linear Mold Shrinkage, Flow	0.0090 cm/cm	0.0090 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.0090 cm/cm	0.0090 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	70.0 MPa	10200 psi	conditioned; ISO 2039-1
	120 MPa	17400 psi	dry; ISO 2039-1
Tensile Strength at Break	40.0 MPa	5800 psi	dry; ISO 527-1/-2
	60.0 MPa	8700 psi	conditioned; ISO 527-1/-2
Tensile Strength, Yield	45.0 MPa	6530 psi	dry; ISO 527-1/-2
	60.0 MPa	8700 psi	dry; ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	dry; ISO 527-1/-2
	>= 50 %	>= 50 %	conditioned; ISO 527-1/-2
Elongation at Yield	5.0 %	5.0 %	dry; ISO 527-1/-2
	18 %	18 %	conditioned; ISO 527-1/-2
Tensile Modulus	1.20 GPa	174 ksi	conditioned; ISO 527-1/-2
	2.20 GPa	319 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	NB	NB	dry; ISO 179/1eU
	NB	NB	conditioned; ISO 179/1eU
	NB @Temperature 30.0 °C	NB @Temperature 86.0 °F	dry; ISO 179/1eU
	NB @Temperature 30.0 °C	NB @Temperature 86.0 °F	conditioned; ISO 179/1eU
Charpy Impact, Notched	0.800 J/cm²	3.81 ft-lb/in²	dry; ISO 179/1eA
	1.80 J/cm²	8.57 ft-lb/in²	conditioned; ISO 179/1eA
	0.800 J/cm² @Temperature 30.0 °C	3.81 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
	0.900 J/cm² @Temperature 30.0 °C	4.28 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	110 µm/m-°C	61.1 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	110 µm/m-°C	61.1 µin/in-°F	ISO 11359-1/-2
Melting Point	220 °C	428 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	110 - 130 °C	230 - 266 °F	long term; EMS
	160 °C	320 °F	short term; EMS
Deflection Temperature at 0.46 MPa (66 psi)	150 °C	302 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	55.0 °C	131 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+11 ohm-cm	1.00e+11 ohm-cm	dry; IEC 60093
	1.00e+11 ohm-cm	1.00e+11 ohm-cm	conditioned; IEC 60093
Surface Resistance	1.00e+11 ohm	1.00e+11 ohm	IEC 60093
Dielectric Strength	34.0 kV/mm	864 kV/in	dry; IEC 60243-1
	34.0 kV/mm	864 kV/in	conditioned; IEC 60243-1
Comparative Tracking Index	600 V	600 V	conditioned; IEC 60112

Descriptive Properties	Value	Comments
Automotive	Air intake sytems
	Compressed air systems
	Fuel systems
	Hydraulic systems
	Powertrain and Chassis
Electricals & Electronics	Cables & Tubes
Form	Granules
Industry & Consumer goods	Hydraulics & Pneumatics
	Mechanical Engineering
	Tools & Accessories
Processing	Other Extrusion
	Profile Extrusion
Product Attributes	Bio based Polyamide
	High viscosity
Special Characteristics	High impact or impact modified
	Improved heat resistance
	Improved UV resistance (outdoor use)
	Light stabilized or stable to light

Users viewing this material also viewed the following: