- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- DuPont Performance Polymers Zytel® 103FHSA NC010 Nylon 66 (Unverified Data**)
DuPont Performance Polymers Zytel® 103FHSA NC010 Nylon 66 (Unverified Data**)
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | DuPont Performance Polymers Zytel® 103FHSA NC010 Nylon 66
(Unverified Data**).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Zytel® 103FHSA NC010 is a heat stabilized, lubricated polyamide 66 for injection molding.Information provided by DuPont Performance Polymers
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | DAM; ISO 1183 |
| Water Absorption | 2.8 % @Temperature 23.0 °C |
2.8 % @Temperature 73.4 °F |
Saturation, immersed; DAM; ISO 62, Similar to |
| 8.5 % @Temperature 23.0 °C |
8.5 % @Temperature 73.4 °F |
Equilibrium 50%RH; DAM; ISO 62, Similar to |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 55.0 MPa @Temperature 23.0 °C |
7980 psi @Temperature 73.4 °F |
50%RH; ISO 527 |
| 85.0 MPa @Temperature 23.0 °C |
12300 psi @Temperature 73.4 °F |
DAM; ISO 527 | |
| Elongation at Break | 16 % @Temperature 23.0 °C |
16 % @Temperature 73.4 °F |
DAM; nominal; ISO 527 |
| 24 % @Temperature 23.0 °C |
24 % @Temperature 73.4 °F |
DAM; ISO 527 | |
| >= 50 % @Temperature 23.0 °C |
>= 50 % @Temperature 73.4 °F |
50%RH; nominal; ISO 527 | |
| >= 50 % @Temperature 23.0 °C |
>= 50 % @Temperature 73.4 °F |
50%RH; ISO 527 | |
| Elongation at Yield | 4.5 % @Temperature 23.0 °C |
4.5 % @Temperature 73.4 °F |
DAM; ISO 527 |
| 23 % @Temperature 23.0 °C |
23 % @Temperature 73.4 °F |
50%RH; ISO 527 | |
| Tensile Modulus | 3.10 GPa @Temperature 23.0 °C |
450 ksi @Temperature 73.4 °F |
DAM; ISO 527 |
| Charpy Impact Unnotched | NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
50%RH; ISO 179/1eU |
| NB @Temperature 23.0 °C |
NB @Temperature 73.4 °F |
DAM; ISO 179/1eU | |
| Charpy Impact, Notched | 0.500 J/cm² @Temperature 23.0 °C |
2.38 ft-lb/in² @Temperature 73.4 °F |
DAM; ISO 179/1eA |
| 0.700 J/cm² @Temperature 23.0 °C |
3.33 ft-lb/in² @Temperature 73.4 °F |
50%RH; ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 263 °C | 505 °F | 10°C/min; DAM; ISO 11357-1/-3 |
| Deflection Temperature at 0.46 MPa (66 psi) | 200 °C | 392 °F | DAM; ISO 75-1/-2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | DAM; ISO 75-1/-2 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 290 °C | 554 °F | DAM; Optimum |
| 280 - 300 °C | 536 - 572 °F | DAM | |
| Drying Temperature | 80.0 °C | 176 °F | DAM |
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM |
| Moisture Content | <= 0.20 % | <= 0.20 % | DAM |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Forms | Pellets | DAM |
| Generic | PA66 | DAM |
| Material Status | Preliminary Data | DAM |
| Processing Method | Injection Molding | DAM |
| Product Category | Unreinforced Resins | DAM |
| RoHS Compliance | Contact Manufacturer | DAM |
Users viewing this material also viewed the following:
- 3M Dyneon™ Fluorel™ FC-2176 Fluoroelastomer VF2 + HFP Dipolymer (discontinued **)
- EVALCA EVAL® LC-E105A Ethylene Vinyl Alcohol Copolymer Resin (discontinued **)
- Momentive Performance Materials FRV1107 Gray Adhesive Sealant, Fuel Resistant Paste
- SABIC Innovative Plastics LNP Lubricomp KFL32L Acetal Copolymer (Asia Pacific)
- Solvay GEROPON® DOS/PG Surfactant
- Wanhua Chemical Wanthane® WHT-1195 Polyester Based TPU
- Colorite Polymers 10014G-015 (Molding) Radiation Sterilizable Vinyl Compound
- Plenco 4311 Phenolic, Granular, Transfer Molded
Copyright © lookpolymers.com All Rights Reserved