- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 46
- Nylon 46, Glass Fiber Reinforced
- DSM Stanyl® TW200F8 (COND) Nylon 46 40% Glass Reinforced, Heat Stabilized (North America)
DSM Stanyl® TW200F8 (COND) Nylon 46 40% Glass Reinforced, Heat Stabilized (North America)
| Category | Polymer , Thermoplastic , Nylon , Nylon 46 , Nylon 46, Glass Fiber Reinforced |
| Manufacturer | DSM Engineering Plastics |
| Trade Name | Stanyl® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | DSM Stanyl® TW200F8 (COND) Nylon 46 40% Glass Reinforced, Heat Stabilized (North America).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by DSM Engineering Plastics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.51 g/cc | 0.0546 lb/in³ | (DAM); ISO 1183 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 140 MPa | 20300 psi | ISO 527-1/-2 |
| Elongation at Break | 6.0 % | 6.0 % | ISO 527-1/-2 |
| Tensile Modulus | 8.00 GPa | 1160 ksi | ISO 527-1/-2 |
| Charpy Impact Unnotched | 9.50 J/cm² | 45.2 ft-lb/in² | ISO 179/1eU |
| 7.50 J/cm² @Temperature -30.0 °C |
35.7 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU | |
| Charpy Impact, Notched | 2.20 J/cm² | 10.5 ft-lb/in² | ISO 179/1eU |
| 1.20 J/cm² @Temperature -30.0 °C |
5.71 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 295 °C | 563 °F | (DAM); ISO 11357-1/-3 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+8 ohm-cm | 1.00e+8 ohm-cm | IEC 60093 |
| Dielectric Strength | 20.0 kV/mm | 508 kV/in | IEC 60243-1 |
| Comparative Tracking Index | 300 V | 300 V | IEC 60112 |
Users viewing this material also viewed the following:
- Plansee WL15 Lanthanum Oxide-doped Tungsten
- 3M Dyneon™ Fluorel™ FG-5630Q Fluoroelastomer VF2 + HFP Dipolymer (discontinued **)
- Overview of materials for Acrylic, Heat Resistant, Molded
- Metabolix Mirelâ„¢ P4001 Sheet Extrusion Grade Bioplastic
- Covestro Bayblend® T85 Polycarbonate + ABS
- Carpenter Pyrowear® 675 Stainless Steel, Tempered 510°C, Longitudinal Properties
- BASF Pluracol® SG-450 Rigid Polyol
- ExxonMobil Exceed™ 3527PA Metallocene Polyethylene Resin (European Grade)
- Plaslok 5314 Black (COM) Impact Grade Phenolic Molding Compound (discontinued **)
- SABIC Innovative Plastics LNP STAT-KON QD000I PA 6/10 (Asia Pacific)
Copyright © lookpolymers.com All Rights Reserved