- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, MoS2 Filled
- Chase Plastics CP Pryme® N100MD2 (DAM) Nylon 6 with 2% MoS2 Lubricated
Chase Plastics CP Pryme® N100MD2 (DAM) Nylon 6 with 2% MoS2 Lubricated
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, MoS2 Filled |
| Manufacturer | Chase Plastics |
| Trade Name | CP Pryme® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Chase Plastics CP Pryme® N100MD2 (DAM) Nylon 6 with 2% MoS2 Lubricated.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Chase Plastics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.15 g/cc | 1.15 g/cc | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 86.2 MPa | 12500 psi | ASTM D638 |
| Elongation at Break | 12 % | 12 % | ASTM D638 |
| Flexural Strength | 114 MPa | 16500 psi | ASTM D790 |
| Flexural Modulus | 3.10 GPa | 450 ksi | ASTM D790 |
| Izod Impact, Notched | 0.374 J/cm | 0.700 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 193 °C | 380 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 71.1 °C | 160 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Precision Polymer Engineering Q90B Polyurethane Rubber
- Styron XZ 91803.00 Carboxylated SB
- SABIC Innovative Plastics LNP VERTON MV00ASXP PP (Europe-Africa-Middle East)
- Hexcel® HexForce™ 5348 Aramid Fabric
- Clariant ABS4500G30 ABS, 30% Glass Reinforced
- Dow Corning XIAMETER® PMCPPMX-200 1.5CS Silicone Fluid
- Ceradyne Ceralloy® 147-1B Reaction Bonded Silicon Nitride (Si3N4)
- LATI LARTON G/40 40% Glass Fiber Filled Polyphenylene sulfide (PPS) (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved