BASF Ultramid® 8260 HS BK-102 40% Mineral Filled PA6 (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 40% Mineral Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® 8260 HS BK-102 40% Mineral Filled PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Ultramid 8260 HS BK-102 is a heat stabilized, pigmented black, 40% mineral reinforced PA6 injection molding resin. It possesses high stiffness, dimensional stability and heat resistance combined with excellent processability including low warp and resistance to sink-mark formation. It maintains its inherent chemical resistance to greases, oils and hydrocarbons.

Physical Properties	Metric	English	Comments
Density	1.49 g/cc	0.0538 lb/in³	ISO 1183
Water Absorption	1.1 %	1.1 %	24 hour; ISO Test
	5.7 %	5.7 %	ISO 62
Moisture Absorption at Equilibrium	1.6 %	1.6 %	23°C/50% R.H.; ISO 62
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	119	119	ASTM Test
Tensile Strength at Break	85.0 MPa	12300 psi	0.2 in/min; ASTM Test
	30.0 MPa @Temperature 120 °C	4350 psi @Temperature 248 °F	ISO Data
	30.0 MPa @Temperature 120 °C	4350 psi @Temperature 248 °F	ASTM Test
	40.0 MPa @Temperature 80.0 °C	5800 psi @Temperature 176 °F	ASTM Test
	40.0 MPa @Temperature 80.0 °C	5800 psi @Temperature 176 °F	ISO Data
	135 MPa @Temperature -40.0 °C	19600 psi @Temperature -40.0 °F	ASTM Test
	135 MPa @Temperature -40.0 °C	19600 psi @Temperature -40.0 °F	ISO Data
Tensile Strength, Ultimate	85.0 MPa	12300 psi	5mm/min; ISO 527
Elongation at Break	10 %	10 %	0.2 in/min; ASTM Test
	10 %	10 %	5mm/min; ISO 527
	6.0 % @Temperature -40.0 °C	6.0 % @Temperature -40.0 °F	ISO Data
	6.0 % @Temperature -40.0 °C	6.0 % @Temperature -40.0 °F	ASTM Test
	35 % @Temperature 80.0 °C	35 % @Temperature 176 °F	ASTM Test
	35 % @Temperature 80.0 °C	35 % @Temperature 176 °F	ISO Data
	40 % @Temperature 120 °C	40 % @Temperature 248 °F	ASTM Test
	40 % @Temperature 120 °C	40 % @Temperature 248 °F	ISO Data
Tensile Modulus	6.40 GPa	928 ksi	1mm/min; ISO 527
	0.970 GPa @Temperature 120 °C	141 ksi @Temperature 248 °F	ISO Data
	1.36 GPa @Temperature 80.0 °C	197 ksi @Temperature 176 °F	ISO Data
	8.31 GPa @Temperature -40.0 °C	1210 ksi @Temperature -40.0 °F	ISO Data
Flexural Strength	140 MPa	20300 psi	ISO Data
Flexural Modulus	5.20 GPa	754 ksi	ISO Data
Izod Impact, Notched (ISO)	6.00 kJ/m²	2.86 ft-lb/in²	ISO Test
Charpy Impact Unnotched	13.0 J/cm²	61.9 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.300 J/cm²	1.43 ft-lb/in²	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	50.0 µm/m-°C @Temperature -30.0 - 30.0 °C	27.8 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	190 °C	374 °F	ISO 75
Flammability, UL94	HB	HB
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093

Processing Properties	Metric	English	Comments
Melt Temperature	275 °C	527 °F	Injection molding
Mold Temperature	95.0 °C	203 °F	Injection molding

Descriptive Properties	Value	Comments
Color	BK-102
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
	X
UL.UL-C	Yes

Users viewing this material also viewed the following: