BASF Ultradur® S 4090 G6X High Speed 30% Glass Filled PBT

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polybutylene Terephthalate (PBT), 30% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultradur®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultradur® S 4090 G6X High Speed 30% Glass Filled PBT.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Description: Low-warpage, easy-flowing injection molding grade with 30 % glass fibers for technical parts, for which dimensional stability is very important, reduction of wall thickness (eg, e/e housings, plug-and-socket connectors.Information provided by BASF

Physical Properties	Metric	English	Comments
Bulk Density	0.600 - 0.900 g/cc	0.0217 - 0.0325 lb/in³
Water Absorption	0.40 %	0.40 %	ISO 62
Moisture Absorption at Equilibrium	0.20 %	0.20 %	ISO 62
Viscosity Measurement	95	95	[cm<sup>3</sup>/g]; ISO 307
Linear Mold Shrinkage, Flow	0.0013 cm/cm	0.0013 in/in	plate with film gate 150x150x3mm<sup>3</sup>
	0.0032 cm/cm	0.0032 in/in	ISO 2577
Linear Mold Shrinkage, Transverse	0.00889 cm/cm	0.00889 in/in	plate with film gate 150x150x3mm<sup>3</sup>
	0.0097 cm/cm	0.0097 in/in	ISO 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	120 MPa	17400 psi	ISO 527-1/-2
Elongation at Break	2.2 %	2.2 %	ISO 527-1/-2
Tensile Modulus	9.50 GPa	1380 ksi	ISO 527-1/-2
Charpy Impact Unnotched	4.00 J/cm² @Temperature -30.0 °C	19.0 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	5.00 J/cm² @Temperature 23.0 °C	23.8 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.780 J/cm² @Temperature 23.0 °C	3.71 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
Melting Point	223 °C	433 °F	ISO 11357-1/-2
Maximum Service Temperature, Air	170 °C	338 °F
Deflection Temperature at 0.46 MPa (66 psi)	220 °C	428 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	200 °C	392 °F	ISO 75-1/-2
Decomposition Temperature	>= 300 °C	>= 572 °F
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+15 ohm-cm	2.00e+15 ohm-cm	IEC 60093
Dielectric Constant	3.7 @Frequency 1.00e+6 Hz	3.7 @Frequency 1.00e+6 Hz	IEC 60250
	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz	IEC 60250
Dissipation Factor	0.0046 @Frequency 100 Hz	0.0046 @Frequency 100 Hz	IEC 60250
	0.0202 @Frequency 1.00e+6 Hz	0.0202 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	425 V	425 V	Test Solution A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	250 - 275 °C	482 - 527 °F	Injection molding/Extrusion
Mold Temperature	60.0 - 100 °C	140 - 212 °F	Injection molding

Descriptive Properties	Value	Comments
Commercial Status	Europe
Ignition Temperature	>400°C	ASTM D1929

Users viewing this material also viewed the following: