BASF Ultradur B 4040 G10 BK5110 50% Glass Filled PBT

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polybutylene Terephthalate (PBT), 50% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultradur B
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultradur B 4040 G10 BK5110 50% Glass Filled PBT.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Injection-molding grades containing 50% of glass fibers, for industrial parts with excellent surface quality.Applications: External door handles in vehicles, visible sunroof frames, over door handles, toaster castings, external mirrors, rear screen wiper arms in vehicles and sunroof wind deflectors.

Physical Properties	Metric	English	Comments
Density	1.73 g/cc	0.0625 lb/in³	ISO 1183
Water Absorption	0.40 %	0.40 %	DIN 53495/1L
Moisture Absorption at Equilibrium	0.12 %	0.12 %	23°C/50% R.H.
Viscosity Test	90 cm³/g	90 cm³/g	Viscosity number
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	Sheet
	0.0024 cm/cm	0.0024 in/in	60x60x2mm; ISO 294
Linear Mold Shrinkage, Transverse	0.0075 cm/cm	0.0075 in/in	Sheet
	0.0077 cm/cm	0.0077 in/in	60x60x2mm; ISO 294
Melt Flow	10.4 g/10 min @Load 2.16 kg, Temperature 275 °C	10.4 g/10 min @Load 4.76 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	165 MPa	23900 psi	5mm/min; ISO 527-2
Elongation at Break	1.5 %	1.5 %	5mm/min; ISO 527-2
Modulus of Elasticity	18.7 GPa	2710 ksi	ISO 527-2
Charpy Impact Unnotched	5.20 J/cm²	24.7 ft-lb/in²	ISO 179/1eU
Charpy Impact, Notched	1.00 J/cm²	4.76 ft-lb/in²	ISO 179/1eA
Dart Drop, Total Energy	<= 5.00 J	<= 3.69 ft-lb	ISO 6603-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	2.00 - 3.00 µm/m-°C @Temperature 23.0 - 80.0 °C	1.11 - 1.67 µin/in-°F @Temperature 73.4 - 176 °F	DIN 53752
Specific Heat Capacity	1.60 J/g-°C	0.382 BTU/lb-°F	IEC 1006
Melting Point	220 - 250 °C	428 - 482 °F
Maximum Service Temperature, Air	140 °C	284 °F	at 50% loss of tensile strength after 20000h; IEC 216-1
	160 °C	320 °F	at 50% loss of tensile strength after 5000h; IEC 216-1
	210 °C	410 °F
Deflection Temperature at 0.46 MPa (66 psi)	221 °C	430 °F	ISO 75-2
Deflection Temperature at 1.8 MPa (264 psi)	205 °C	401 °F	ISO 75-2
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+16 ohm	>= 1.00e+16 ohm	IEC 60093
Dielectric Constant	4.5 @Frequency 1.00e+6 Hz	4.5 @Frequency 1.00e+6 Hz	IEC 60250
	4.7 @Frequency 100 Hz	4.7 @Frequency 100 Hz	IEC 60250
Dielectric Strength	16.0 kV/mm	406 kV/in	IEC 243/1
Dissipation Factor	0.015 @Frequency 1.00e+6 Hz	0.015 @Frequency 1.00e+6 Hz	IEC 60250
	0.020 @Frequency 100 Hz	0.020 @Frequency 100 Hz	IEC 60250
Comparative Tracking Index	225 V	225 V	Test solution A; IEC 112

Processing Properties	Metric	English	Comments
Melt Temperature	250 - 275 °C	482 - 527 °F	Injection molding
	270 °C	518 °F	for shrinkage test
Mold Temperature	60.0 - 100 °C	140 - 212 °F
	80.0 °C	176 °F	for shrinkage test

Descriptive Properties	Value	Comments
Color	BK5110 and Colored
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Release agent

Users viewing this material also viewed the following: