BASF Capron® 8202 NL Nylon 6 (DAM) (discontinued **)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Capron® 8202 NL Nylon 6 (DAM) (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Information provided by BASF Corporation.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line.

Physical Properties	Metric	English	Comments
Density	1.13 g/cc	0.0408 lb/in³	ISO 1183
Water Absorption	1.6 %	1.6 %	24 hr.; ISO 62
	9.5 %	9.5 %	ISO 62
Moisture Absorption at Equilibrium	2.7 %	2.7 %	23°C/50% R.H.; ISO 62
Viscosity Measurement	48	48	Formic Acid; ASTM D789
Linear Mold Shrinkage	0.012 cm/cm	0.012 in/in	MD; ASTM Test

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	119	119	ASTM D785
Tensile Strength at Break	75.0 MPa	10900 psi	0.2 in/min; ASTM D638
Tensile Strength, Yield	79.0 MPa	11500 psi	50 mm/min; ISO 527
	79.0 MPa	11500 psi	2 in/min; ASTM D638
	25.0 MPa @Temperature 120 °C	3630 psi @Temperature 248 °F	ASTM D638
	25.0 MPa @Temperature 120 °C	3630 psi @Temperature 248 °F	ISO 527
	35.0 MPa @Temperature 80.0 °C	5080 psi @Temperature 176 °F	ASTM D638
	35.0 MPa @Temperature 80.0 °C	5080 psi @Temperature 176 °F	ISO 527
	125 MPa @Temperature -40.0 °C	18100 psi @Temperature -40.0 °F	ASTM D638
	125 MPa @Temperature -40.0 °C	18100 psi @Temperature -40.0 °F	ISO 527
Elongation at Break	25 %	25 %	50 mm/min; Nominal; ISO 527
	55 %	55 %	2 in/min; ASTM D638
Elongation at Yield	4.0 %	4.0 %	50 mm/min; ISO 527
	4.0 %	4.0 %	2 in/min; ASTM D638
	36 % @Temperature 120 °C	36 % @Temperature 248 °F	ASTM D638
	42 % @Temperature 80.0 °C	42 % @Temperature 176 °F	ASTM D638
Modulus of Elasticity	0.360 GPa @Temperature 120 °C	52.2 ksi @Temperature 248 °F	ISO 527
	0.485 GPa @Temperature 80.0 °C	70.3 ksi @Temperature 176 °F	ISO 527
Tensile Modulus	3.10 GPa	450 ksi	1 mm/min; ISO 527
Flexural Strength	110 MPa	16000 psi	ASTM D790
	20.0 MPa @Temperature 120 °C	2900 psi @Temperature 248 °F	ASTM D790
	20.0 MPa @Temperature 93.0 °C	2900 psi @Temperature 199 °F	ASTM D790
	30.0 MPa @Temperature 65.0 °C	4350 psi @Temperature 149 °F	ASTM D790
	170 MPa @Temperature -40.0 °C	24700 psi @Temperature -40.0 °F	ASTM D790
Flexural Modulus	2.83 GPa	410 ksi	ASTM D790
	0.305 GPa @Temperature 120 °C	44.2 ksi @Temperature 248 °F	ASTM D790
	0.350 GPa @Temperature 93.0 °C	50.8 ksi @Temperature 199 °F	ASTM D790
	0.500 GPa @Temperature 65.0 °C	72.5 ksi @Temperature 149 °F	ASTM D790
	3.01 GPa @Temperature -40.0 °C	437 ksi @Temperature -40.0 °F	ASTM D790
Izod Impact, Notched	0.600 J/cm	1.12 ft-lb/in	ASTM D256
	0.500 J/cm @Temperature -40.0 °C	0.937 ft-lb/in @Temperature -40.0 °F	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	83.0 µm/m-°C @Temperature 20.0 °C	46.1 µin/in-°F @Temperature 68.0 °F	ASTM E831
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi)	178 °C	352 °F	ISO 75
	178 °C	352 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	ISO 75
	65.0 °C	149 °F	ASTM D648

Descriptive Properties	Value	Comments
Additive	Unfilled
Color	Natural
Commercial Status (March 2007)	Active America
FDA	21 CFR 177.1500
Form	Pellets
Impact Modified	No
Injection molding	Processable
Primary Processing Technique	Film Extrusion

Users viewing this material also viewed the following: