Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Arlon Thermabond® 99A90N008 Primerless Electronic Adhesive  (discontinued **)

Category Polymer , Adhesive , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone Rubber
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Arlon Thermabond® 99A90N008 Primerless Electronic Adhesive  (discontinued **).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Electrically insulating, thermally conductive, electronic adhesive. Bonds without primer.
Physical Properties Metric English Comments
Specific Gravity 1.85 g/cc
1.85 g/cc
Silicone Property; Arlon SQA-TMS-024
Thickness 203 microns
8.00 mil
Arlon SQA-TMS-003
Mechanical Properties Metric English Comments
Hardness, Shore A 87
87
Silicone Property; ASTM D2240
Tensile Strength, Ultimate 2.52 MPa
365 psi
Silicone Property; ASTM D412
Elongation at Break 28 %
28 %
Silicone Property; ASTM D412
Modulus of Elasticity 0.0621 GPa
9.00 ksi
1% strain, Silicone Property; Arlon SQA-TMS-008
Poissons Ratio 0.50
0.50
Shear Modulus 0.00183 GPa
0.265 ksi
up to 100% strain; ASTM D1002
Shear Strength 0.965 MPa
140 psi
Lap; ASTM D1002
Thermal Properties Metric English Comments
CTE, linear 52.0 µm/m-°C

@Temperature 20.0 °C
28.9 µin/in-°F

@Temperature 68.0 °F
Silicone Property; ASTM E 831
Specific Heat Capacity 0.850 J/g-°C

@Temperature 100 °C
0.203 BTU/lb-°F

@Temperature 212 °F
Silicone Property; ASTM E 1952
Thermal Conductivity 3.00 W/m-K
20.8 BTU-in/hr-ft²-°F
Silicone Property; ASTM E 1530
3.38667 W/m-K

@Temperature 100 °C
23.5035 BTU-in/hr-ft²-°F

@Temperature 212 °F
Arlon SQA-TMS-054
Maximum Service Temperature, Air 95.6 °C
204 °F
Minimum Service Temperature, Air -73.3 °C
-100 °F
Glass Transition Temp, Tg -119 °C
-182 °F
Silicone Property; ASTM D3418
Electrical Properties Metric English Comments
Dielectric Constant 4.602

@Frequency 1.00e+6 Hz
4.602

@Frequency 1.00e+6 Hz
Silicone Property; IPC TM 650 - 2.5.5.3
Dielectric Strength 35.4 kV/mm
900 kV/in
ASTM D149
Dissipation Factor 0.0041

@Frequency 1.00e+6 Hz
0.0041

@Frequency 1.00e+6 Hz
Silicone Property; IPC TM 650 - 2.5.5.3
Processing Properties Metric English Comments
Cure Time 15.0 min

@Pressure 0.345 MPa,
Temperature 121 °C
0.250 hour

@Pressure 50.0 psi,
Temperature 250 °F
Shelf Life 6.00 Month

@Temperature 7.00 °C
6.00 Month

@Temperature 44.6 °F
Descriptive Properties Value Comments
Color Gray
Plasticity (mm) Arlon SQA-TMS-005 Silicone Property
Copyright © lookpolymers.com All Rights Reserved