- HOME
- POLYMER SEARCH
- Polymer Property : Minimum Service Temperature, Air = -100 °F
Polymer Property : Minimum Service Temperature, Air = -100 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Arlon Thermabond® R37340X008 Primerless Electronic Adhesive
(discontinued **) Liner: 1 mil FEP; Product: uncured Silicone Rubber; Carrier: 3 mil PTFE coated fiberglas |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Arlon R34710R020 0.020" (0.508 mm) Uncured Silicone Rubber with Fiberglass Substrate
(discontinued **)&l Description: 20 mil thick uncured, uncatalyzed silicone rubber. Used for sealing biochemical reaction chambers.Design/Construction:Liner: Polyethylene Product: Uncured Silicone Rubber Carrier: Mylar.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Garlock 5507 Compressed Inorganic Fiber Gasketing, EPDM Binder Inorganic fibers with an EPDM binder.Inorganic fiber gasketing offers excellent thermal stability with minimal weight lossReduced creep relaxation and improved torque retention provide optimal seala.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Garlock LEAK-GARDâ„¢ 3750 Compressed Aramid Fiber Gasketing Aramid fibers with a proprietary rubber binder.Proprietary compound reacts with oil to create tight seal without gasket degradationActually increases bolt load and bolt load retention; compensates f.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Garlock MULTI-SWELLâ„¢ 3760 Compressed Aramid Fiber Gasketing Aramid fibers with a proprietary rubber binder.Creates compressive load in light weight flanges in oil and water serviceTwice as compressible as standard fiber gasketsSeals with low load and irregul.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Greene Tweed WR™ FP100 Polyketone, Reinforced Greene Tweed’s WR® FP100, a reinforced compression-molded polyketone, offers excellent wear resistance with FDA compliance. The typical properties and physical characteristics of WR FP100 m.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® 2285-2 Extruded PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® 2355-2 FEP Film Backing Silicone Adhesive Pressure Sensitive Tape Description: FEP film is used for applications requiring optical clarity, quick release, and abrasion resistance. FEP film applications include high temperature coil and capacitor wrapping, composit.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® 23816 Glass-Silicone Backing Silicone Adhesive Pressure Sensitive Tape Description: Silicone glass provides temperature resistance from -85°F to +500°F (-62°C to +260°C) and exceptional tensile strength and abrasion resistance. Applications include thermal .. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® 2975-8R Glass-Silicone Backing Silicone Adhesive Pressure Sensitive Tape Description: Silicone glass provides temperature resistance from -85°F to +500°F (-62°C to +260°C) and exceptional tensile strength and abrasion resistance. Applications include thermal .. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® G561 Glass Cloth Backing Silicone Adhesive Pressure Sensitive Tape Description: Glass cloth offers excellent abrasion resistance and mechanical properties, as well as high tensile strength and extreme temperature resistance. Service temperatures range from -100°.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® M824 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® M835 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape Description: Polyester films have excellent dimensional stability, high tensile, tear, and impact strengths, and ultimate elongation up to 120% of its original dimensions. These films exhibit low wa.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® SG03-10(R) Premium Glass-PTFE Backing Acrylic Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® SG05-14(R) Premium Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® SG06-03(R) Premium Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® SG06-10(R) Premium Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® SG55-06(R) Anti-Static Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® SG56-05(R) Anti-Static Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE glass provide dimensional stability, high tensile strength and edge tear, operates over a temperature range from -100°F to +500°F (-73°C to 260°C), and offers better ab.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Saint-Gobain CHR® T303 TRIFOIL™ PTFE/Aluminum Foil Backing for Pressure Sensitive Tapes Description: Aluminum and copper foil tapes offer high conformability, conductivity, and reflectivity at elevated temperatures. Aluminum is available with a fiberglass laminate for applications requ.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Master Bond EP21TDCN Two Component Nickel Conductive Epoxy Adhesive Product Description: Master Bond Polymer System EP21TDCN is a two component, nickel filled, electrically conductive, adhesive for high performance bonding, formulated to cure at room temperature or .. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Master Bond Ep46HT-2 Two Component, Heat Resistant Epoxy System Master Bond Polymer System EP46HT-2 is a two component epoxy system for bonding, sealing and casting applications where resistance to temperatures from -100°F to +500°F is required. It is 100% rea.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Master Bond Super Gel 9AOND Dimensionally Stable Urethane Modified Epoxy Master Bond Super Gel 9AOND is a two component, urethane modified epoxy system that cures at room temperature and has a paste-like consistency. It offers softness and retains dimensional stability. .. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Master Bond Supreme 11AO Electrically Isolating Adhesive and Sealant Description: Master Bond Polymer System SURPEME 11AO is a two component epoxy resin system for high performance bonding and sealing formulated to cure at room temperature or more rapidly at elevated.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Master Bond Supreme 11HT-LO Adhesive and Sealant Serviceable to +400°F Description: Master Bond Polymer System Supreme 11HT-LO is an easy to use two part epoxy adhesive/sealant combining both high shear and high peel strengths along with a relatively fast cure at room .. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Arlon 99410R015 0.015" Uncured Silicone Rubber with PTFE Coated Fiberglass Substrate Design/Construction:Interleave: 0.001" FEPSide 1: Unsupported/Uncured Silicone RubberSubstrate: 0.003" PTFE coated FiberglassThis data represents typical values for the production material and sho.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Arlon Thermabond® 99730N015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier Description: Electrically Conductive - Thermabond®. Bonds with primer.Design/Construction: Liner: FEP Product: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassRecommended Primers: Dow Coring.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Arlon R30370A015 0.015" Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: 0.001" FEP FilmSide 1: Unsupported/Uncured Silicone RubberSubstrate: 0.003" PTFE coated FiberglassThis data represents typical values for the production material a.. |
|||
| Minimum Service Temperature, Air | -73.3 °C | -100 °F | |
| Master Bond Supreme 3ANHT Epoxy Adhesives for Bonding Stainless Steel Description: Master Bond Polymer System Supreme 3ANHT is a one component, heat cured epoxy adhesive and sealant, featuring high peel and shear strength along with good thermal conductivity and conve.. |
|||
Copyright © lookpolymers.com All Rights Reserved