- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone Rubber
- Arlon R33670N004 0.004" (0.102 mm) Uncured Silicone Rubber with K2030 PEN Film Substrate
Arlon R33670N004 0.004" (0.102 mm) Uncured Silicone Rubber with K2030 PEN Film Substrate
| Category | Polymer , Thermoset , Silicone , Silicone Rubber |
| Manufacturer | Arlon |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Arlon R33670N004 0.004" (0.102 mm) Uncured Silicone Rubber with K2030 PEN Film Substrate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Design/Construction:Side 1: Uncured Silicone Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Division
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Thickness | 25.4 microns | 1.00 mil | Interleave: Release liner to be determined (Temporarily FEP Film) |
| 50.8 microns | 2.00 mil | K2030 PEN Film, Substrate | |
| 25.4 - 76.2 microns | 1.00 - 3.00 mil | Side 1 | |
| 76.2 - 127 microns | 3.00 - 5.00 mil | Overall |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 40 - 50 | 40 - 50 | Compound Property |
| Tensile Strength | >= 6.89 MPa | >= 1000 psi | Compound Property |
| Elongation at Break | >= 600 % | >= 600 % | Compound Property |
| Peel Strength | >= 0.351 kN/m | >= 2.00 pli | Bond Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 160 °C | 320 °F | |
| Minimum Service Temperature, Air | -40.0 °C | -40.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | >= 15.7 kV/mm | >= 400 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 5.00 min @Pressure 0.345 MPa, Temperature 138 °C |
0.0833 hour @Pressure 50.0 psi, Temperature 280 °F |
Recommended Cure Cycle |
| Shelf Life | 3.00 Month @Temperature 4.44 °C |
3.00 Month @Temperature 40.0 °F |
From date of manufacture |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Natural | |
| Total Product Weight (oz/yd2) | 3 - 4.8 | |
| Uncoated Fabric Break Strength | 31900 lb/in | Warp Direction, Substrate Property |
| 31900 lb/in | Fill Direction, Substrate Property |
Users viewing this material also viewed the following:
- PPT LSF25 Low Sintering Temperature Ferrite Powder
- Quadrant EPP Quadrant 1000 LSP PC Extruded Unfilled Polycarbonate
- Karina 42/154-FC-LMP (SDB) Red Color Concentrate for PVC
- Sylvin Technologies 9915-75 Natural PVC Molding Compound
- ELASTO UK Dryflex® 662550S SEBS Based Material, Semi-Filled Qualities, 55A Hardness, Black
- Diamond Polymers NPP 808 C4 TDS Polycarbonate Alloy
- Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer
- Akzo Nobel Trigonox® K-80 Polymerization Initiator
Copyright © lookpolymers.com All Rights Reserved