Arkema Group Oroglas® VS-UVT Acrylic, Injection Molding Grade (discontinued **)

Category	Polymer , Thermoplastic , Acrylic (PMMA) , Acrylic, General Purpose, Molded
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arkema Group Oroglas® VS-UVT Acrylic, Injection Molding Grade (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

The outstanding flow of OROGLAS VS-UVT makes it as the material of choice for injection molding of part with thin wall thickness.The ultraviolet transmitting ( uvt) formulation is developed to meet the specific requirement of medical diagnostic components.OROGLAS VS-UVT is FDA approved.ISO data provided by the manufacturer, Arkema.Arkema, formed in 2004, was formerly Atofina Chemicals and before that Elf Atochem.

Physical Properties	Metric	English	Comments
Density	1.18 g/cc	0.0426 lb/in³
Water Absorption	1.7 %	1.7 %
Moisture Absorption at Equilibrium	0.30 %	0.30 %	Humidity Absorption
Melt Flow	22 g/10 min @Load 3.80 kg, Temperature 230 °C	22 g/10 min @Load 8.38 lb, Temperature 446 °F

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	65.0 MPa	9430 psi	50 mm/min
Elongation at Break	5.0 %	5.0 %	Nominal Strain; 50 mm/min
Tensile Modulus	2.90 GPa	421 ksi	1 mm/min
Charpy Impact Unnotched	1.90 J/cm²	9.04 ft-lb/in²
Charpy Impact, Notched	0.200 J/cm²	0.952 ft-lb/in²
Tensile Creep Modulus, 1 hour	2400 MPa	348000 psi
Tensile Creep Modulus, 1000 hours	1400 MPa	203000 psi

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	70.0 µm/m-°C @Temperature 20.0 °C	38.9 µin/in-°F @Temperature 68.0 °F
Deflection Temperature at 0.46 MPa (66 psi)	80.0 °C	176 °F
Deflection Temperature at 1.8 MPa (264 psi)	76.0 °C	169 °F
Vicat Softening Point	80.0 °C	176 °F	50°C/hr; 50N
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Optical Properties	Metric	English	Comments
Transmission, Visible	80 %	80 %	Mfr. reports 'Transparent' but doesn't quantify.

Electrical Properties	Metric	English
Electrical Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Dielectric Constant	3.2 @Frequency 1e+6 Hz	3.2 @Frequency 1e+6 Hz
	3.7 @Frequency 100 Hz	3.7 @Frequency 100 Hz
Dielectric Strength	19.7 kV/mm	500 kV/in
Dissipation Factor	0.040 @Frequency 1e+6 Hz	0.040 @Frequency 1e+6 Hz
	0.050 @Frequency 100 Hz	0.050 @Frequency 100 Hz
Comparative Tracking Index	600 V	600 V

Users viewing this material also viewed the following: