- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone Rubber
- Silicone, Molded, Glass Fiber Filled
- Arlon R36319R028 Silicone Rubber/Fiberglass Laminate
Arlon R36319R028 Silicone Rubber/Fiberglass Laminate
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone Rubber , Silicone, Molded, Glass Fiber Filled |
| Manufacturer | Arlon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Arlon R36319R028 Silicone Rubber/Fiberglass Laminate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Interleave: 3 mil PE; Layer 2: uncured silicone rubber; Layer 1: Cured silicone rubber; Substrate: 162 fiberglass
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.38 g/cc | 1.38 g/cc | Arlon SQA-TMS-024 |
| Thickness | 127 microns | 5.00 mil | layer 1; Arlon SQA-TMS-003 |
| 152 microns | 6.00 mil | layer 2; Arlon SQA-TMS-003 | |
| 432 microns | 17.0 mil | substrate; Arlon SQA-TMS-003 | |
| 711 microns | 28.0 mil | overall; Arlon SQA-TMS-003 | |
| Outgassing - Total Mass Loss | 0.34 % | 0.34 % | post cured; ASTM E 595 |
| 1.07 % | 1.07 % | no post cure; ASTM E 595 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 48 | 48 | silicone property; ASTM D2240 |
| Tensile Strength, Ultimate | 5.86 MPa | 850 psi | ASTM D412 |
| Elongation at Break | 450 % | 450 % | silicone property; ASTM D412 |
| Adhesive Bond Strength | 0.103 MPa | 15.0 psi | Arlon SQA-TMS-047 |
| Tear Strength | 12.3 kN/m | 70.0 pli | Die B; silicone property; ASTM D624 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 232 °C | 450 °F | |
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 14.4 kV/mm | 365 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 218 °C |
2.00 hour @Temperature 425 °F |
|
| 15.0 min @Pressure 0.345 MPa, Temperature 121 °C |
0.250 hour @Pressure 50.0 psi, Temperature 250 °F |
||
| Shelf Life | 6.00 Month @Temperature 23.9 °C |
6.00 Month @Temperature 75.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Red | |
| Outgassing - CVCM (%) ASTM E595 | 0.1 | post cured |
| 0.28 | no post cure |
Users viewing this material also viewed the following:
- Polymer Resources PPX/NY G10 PPO/Nylon 66 Alloy , 10% Glass Reinforced
- DuPont Bynel® 21E553 Adhesive Resin (discontinued **)
- A. Schulman POLYFORT™ PP 2801 Homopolymer Polypropylene
- Teknor Apex Telcar® TL-2585F Thermoplastic Elastomer
- ExxonMobil Mobil Polyrex EP 2
- Ashley Polymers Ashlene® 1021T Polycarbonate
- DSM Akulon® K223-TP4 (Dry) Impact Modified Nylon 6 (North America)
- DSM Stanyl® TW241F5 PA46-GF25
Copyright © lookpolymers.com All Rights Reserved