Category | Polymer , Thermoplastic , Elastomer, TPE , Polyurethane TPE |
Manufacturer | Alliance Polymers |
Trade Name | Zythane™ |
Port | Shanghai port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Alliance Polymers Zythane™ 5045D Thermoplastic Polyurethane Elastomer.pdf ![]() |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.23 g/cc | 0.0444 lb/in³ | ASTM D792 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Hardness, Shore A | 95 | 95 | ASTM D2240 |
Hardness, Shore D | 45 | 45 | ASTM D2240 |
Tensile Strength at Break | 47.0 MPa | 6820 psi | ASTM D412 |
Tensile Stress | 9.03 MPa @Strain 100 % |
1310 psi @Strain 100 % |
ASTM D412 |
20.0 MPa @Strain 300 % |
2900 psi @Strain 300 % |
ASTM D412 | |
Elongation at Break | 520 % | 520 % | ASTM D412 |
Tear Strength | 100 kN/m | 571 pli | Die C; ASTM D412 |
Taber Abrasion, mg/1000 Cycles | 28 | 28 | ASTM D1044 |
Abrasion | 25 | 25 | mm<sup>3</sup>; DIN 53516 |
Compression Set | 23 % @Temperature 22.8 °C, Time 79200 sec |
23 % @Temperature 73.0 °F, Time 22.0 hour |
ASTM D3995B |
43 % @Temperature 70.0 °C, Time 259000 sec |
43 % @Temperature 158 °F, Time 72.0 hour |
ASTM D3995B |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 147 °C | 297 °F | ASTM D1525 |
Brittleness Temperature | -22.0 °C | -7.60 °F | ASTM D746 |
Flammability, UL94 | HB @Thickness 1.00 mm |
HB @Thickness 0.0394 in |
|
HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
||
HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
Processing Properties | Metric | English | Comments |
---|---|---|---|
Processing Temperature | 205 °C | 401 °F | Gate Temperature; Extrusion |
205 - 215 °C | 401 - 419 °F | Injection | |
Rear Barrel Temperature | 190 °C | 374 °F | Injection |
Middle Barrel Temperature | 200 °C | 392 °F | Injection |
Front Barrel Temperature | 210 °C | 410 °F | Injection |
Nozzle Temperature | 205 - 215 °C | 401 - 419 °F | Injection |
Zone 1 | 190 °C | 374 °F | Extrusion |
Zone 2 | 200 °C | 392 °F | Extrusion |
Zone 3 | 210 °C | 410 °F | Extrusion |
Die Temperature | 215 °C | 419 °F | Extrusion |
Mold Temperature | 25.0 - 60.0 °C | 77.0 - 140 °F | Injection |
Injection Velocity | >= 10.0 mm/sec | >= 0.394 in/sec | Injection |
Drying Temperature | 85.0 °C | 185 °F | Injection |
85.0 °C | 185 °F | Extrusion | |
Dry Time | 4.00 hour | 4.00 hour | Injection |
4.00 hour | 4.00 hour | Extrusion | |
Back Pressure | 0.600 - 1.20 MPa | 87.0 - 174 psi | Injection |
Clamp Pressure | 40.0 - 70.3 MPa | 5800 - 10200 psi | Injection |
Screw Speed | 60 - 200 rpm | 60 - 200 rpm | Injection |