Arlon R36580N015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier

Category	Polymer , Thermoset , Silicone , Silicone Rubber
Manufacturer	Arlon
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arlon R36580N015 0.015" (0.381 mm) Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Design/Construction: Liner: FEP Product: Uncured Silicone Rubber Carrier: PTFE Coated FiberglassAppearance: Grey silicone gumThis data represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Division

Physical Properties	Metric	English	Comments
Density	3.70 g/cc	0.134 lb/in³	Silicone Property; Arlon SQA-TMS-024
Thickness	25.4 microns	1.00 mil	Liner
	76.2 microns	3.00 mil	Carrier
	381 microns	15.0 mil	Overall; Arlon SQA-TMS-003

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	84	84	Silicone Property; ASTM D2240
Tensile Strength	3.34 MPa	485 psi	Silicone Property; ASTM D412
Elongation at Break	60 %	60 %	Silicone Property; ASTM D412
Modulus of Elasticity	0.01957 GPa	2.838 ksi	ASTM E 831
Poissons Ratio	0.50	0.50	Approximately, Silicone Property
Shear Modulus	0.000379 GPa	0.0550 ksi	ASTM D 1002
Shear Strength	3.65 MPa	530 psi	Lap Shear Strength; ASTM D1002

Thermal Properties	Metric	English	Comments
CTE, linear	93.0 µm/m-°C	51.7 µin/in-°F	Silicone Property; ASTM E 831
Specific Heat Capacity	0.400 J/g-°C	0.0956 BTU/lb-°F	E 1461-01
Thermal Conductivity	0.750 W/m-K	5.20 BTU-in/hr-ft²-°F	Silicone Property; ASTM E 1530
Maximum Service Temperature, Air	204 °C	400 °F
Minimum Service Temperature, Air	-73.3 °C	-100 °F
Glass Transition Temp, Tg	<= -100 °C	<= -148 °F	Silicone Property; ASTM D3418

Electrical Properties	Metric	English	Comments
Volume Resistivity	500 ohm-cm	500 ohm-cm	Silicone Property; ASTM D991

Processing Properties	Metric	English	Comments
Cure Time	15.0 min @Temperature 141 °C	0.250 hour @Temperature 285 °F	Recommended Cure Cycle
Shelf Life	6.00 Month @Temperature -15.0 - -9.44 °C	6.00 Month @Temperature 5.00 - 15.0 °F	From date of manufacture

Descriptive Properties	Value	Comments
Color	Naturally Gray
Total Product Weight (g/m2)	1410	Arlon SQA-TMS-025

Users viewing this material also viewed the following: