Polymer Property : Tensile Strength, Ultimate = 3050 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	21.0 MPa	3050 psi	ASTM D638
Multibase Nylex™ 1230 Natural Polyamide + PP Features: Crack Resistance, GoodDimensional Stability, GoodImpact Resistance, GoodMoisture ResistantProcessability, GoodForms:PelletsProcessing Methods:Injection MoldingUses: Electrical PartsHousing..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	ASTM D638
ExxonMobil Escorene® LL-5002 LLDPE Compounding Resin (discontinued **) Data provided by the manufacturer, Exxon Chemical.A linear low density polyethylene resin designed to provide good processability and ease of blending. LL-5002 also exhibits good toughness and envi..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	Compounded Tire
Chlorosulfonated Polyethylene Rubber (CM, CSM) The chlorine (in CM) or chlorine and chlorosulfonyl (CSM) groups prevent the crystallization that occurs on unmodified polyethylene.
Tensile Strength, Ultimate	21.0 MPa	3050 psi	ASTM D638
LyondellBasell Astryn BE17FC Polypropylene Copolymer, 40% Calcium Carbonate Key Features: fractional melt flow, medium high modulus, UV-stabilized, mineral-filled, blow molding and extrusion grade polypropylene copolymer, excellent impact and stiffness balance, good melt st..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ASTM D638
A. Schulman INVISION™ FX-9090UE Soft Touch Polyolefin Thermoplastic DescriptionInvision™ FX-9090UE is a polyolefin-based thermoplastic of 90 Shore A durometer, which has been formulated soft touch, excellent scratch/mar resistance, low gloss, and excellent weathera..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 120E Non-Reinforced, Extrusion Grade Zinc Ionomer DescriptionFormion® FI 120E is a non-reinforced, transparent, extrusion grade Zinc Ionomer. It has been formulate for high durability, cut and puncture resistance, and low temperature ductility.Ap..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 391E Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 120 Non-Reinforced, Injection Molding Grade Zinc Ionomer DescriptionFormion® FI 120 is a non-reinforced, transparent, injection molding grade Zinc Ionomer. It has been formulated for high durability, scratch resistance, low temperature ductility, and lo..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ASTM D638
A. Schulman INVISION™ FX-9090UE Soft Touch Polyolefin Thermoplastic DescriptionInvision™ FX-9090UE is a polyolefin-based thermoplastic of 90 Shore A durometer, which has been formulated soft touch, excellent scratch/mar resistance, low gloss, and excellent weathera..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	ASTM D638
Toyobo Pelprene™ P-280B Polyester TPE Key Feature: Pelprene P typePelprene™ can be processed into a wide variety of articles from ultra-small precision parts to sheets by injection, extrusion, and blow molding. The 'P' type is a block..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 105 Non-Reinforced, Injection Molding Grade Sodium Ionomer DescriptionFormion® FI 105 is a non-reinforced, transparent, injection molding grade Sodium Ionomer. It has been formulated for high durability, scratch resistance, low temperature ductility, and ..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 120E Non-Reinforced, Extrusion Grade Zinc Ionomer DescriptionFormion® FI 120E is a non-reinforced, transparent, extrusion grade Zinc Ionomer. It has been formulate for high durability, cut and puncture resistance, and low temperature ductility.Ap..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 389 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 392 Ionomer Information provided by A. Schulman.
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 105 Non-Reinforced, Injection Molding Grade Sodium Ionomer DescriptionFormion® FI 105 is a non-reinforced, transparent, injection molding grade Sodium Ionomer. It has been formulated for high durability, scratch resistance, low temperature ductility, and ..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 120 Non-Reinforced, Injection Molding Grade Zinc Ionomer DescriptionFormion® FI 120 is a non-reinforced, transparent, injection molding grade Zinc Ionomer. It has been formulated for high durability, scratch resistance, low temperature ductility, and lo..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 120E Non-Reinforced, Extrusion Grade Zinc Ionomer DescriptionFormion® FI 120E is a non-reinforced, transparent, extrusion grade Zinc Ionomer. It has been formulate for high durability, cut and puncture resistance, and low temperature ductility.Ap..
Tensile Strength, Ultimate	21.0 MPa	3050 psi
Covestro Baydur® 60 Polyurethane Rigid integral skin polyurethane foam for engineering components. The integral distribution of density gives a higher flexural modulus. If required, the property level can be improved by increasing ..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	508 mm/min; ASTM D638
Dow Engage® 8445 Polyolefin Elastomer Description: Engage® 8445 polyolefin elastomer is an ethyleneoctene copolymer that performs well in a wide range of thermoplastic elastomer applications. It has excellent compatibility with other p..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	Dynamic tensile strength
Channel Industries 1300 Barium Titanate Piezoelectric Navy IV typeModified barium titanates are widely used in transducers requiring moderate power level and receiving sensitivity. Special characteristics have made barium titanate a proven material for..
Tensile Strength, Ultimate	21.0 MPa	3050 psi	ISO 527-1/-2
DSM Arnitel® EB464-01 TPC-ET Antisqueak Blow Molding Grade
Tensile Strength, Ultimate	21.0 MPa	3050 psi	at max load; ISO 527
A. Schulman FORMION™ FI 105E Non-Reinforced, Extrusion Grade Sodium Ionomer DescriptionFormion® FI 1051E is a non-reinforced, transparent, extrusion grade Sodium Ionomer. It has been formulated for high durability, cut and puncture resistance, and low temperature ductilit..
Tensile Strength, Ultimate	21.0 - 48.0 MPa	3050 - 6960 psi	Average value: 33.2 MPa Grade Count:11
Overview of materials for Ethyl Cellulose, Molded This property data is a summary of similar materials in the MatWeb database for the category "Ethyl Cellulose, Molded". Each property range of values reported is minimum and maximum values of approp..