Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 120 MPa | 17400 psi | MD; DIN EN ISO 527 |
Propex Fabrics Curv™ C100A Polypropylene/Polypropylene Thermoformable Composite Curv™ key features include weight savings, total recyclability, no glass content, thermoformable, high impact strength, inertness, and abrasion resistance.Data provided by BP Amoco; Curv was spun o.. |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | CD; DIN EN ISO 527 |
Propex Fabrics Curv™ C100A Polypropylene/Polypropylene Thermoformable Composite Curv™ key features include weight savings, total recyclability, no glass content, thermoformable, high impact strength, inertness, and abrasion resistance.Data provided by BP Amoco; Curv was spun o.. |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ASTM data at 5 mm/min. |
BASF Capron® GR40 HS 40% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron GR40 HS is a heat stabilized 40% glass reinforced polyamide 6 injection molding compound offering the highest level of strength, stiffness, high temperature performance and dimensional stabil.. |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ASTM data at 5 mm/min. |
BASF Capron® SEG3 H1 15% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron SEG3 H1 is a 15% glass reinforced nylon 6 injection molding compound exhibiting. It exhibits exceptional surface aesthetics at the slower fill speeds associated with the gas assist injection .. |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ISO 527 |
LATI LATILUB 88/50-20GRT K/10 PEEK Based, 10% Carbon Fiber Reinforced, 20% Graphite and PTFE Self Lubricating Plastic Latilub self-lubricating plastic materials are designed to replace metals in applications such as gears, bushings, cams, slides, etc., for which, besides their intrinsic properties (moldability, low.. |
|||
Tensile Strength, Ultimate | 120 - 220 MPa | 17400 - 31900 psi | Average value: 175 MPa Grade Count:9 |
Overview of materials for Nylon 6-3 This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6-3". Each property range of values reported is minimum and maximum values of appropriate MatWeb e.. |
|||
Tensile Strength, Ultimate | 120 MPa @Temperature 1090 °C |
17400 psi @Temperature 2000 °F |
|
Kennametal Stellite Stellite® 6K 1.6 mm thick sheet 13.3 mm^3 volume loss--abrasive wear data. Applications include agitators, augers, ball mills, banbury mills, cams, crusher bearings, dryers, dry presses, dump cars, fans, filters, food machinery, g.. |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ISO527-2/1A |
Suzhou Hipro Polymers Hiprolon® 400 MC HLS G30 Nylon, 30% glass fiber filled Hiprolon® 400 MC HLS G30 is a specialty long chain polyamide compound reinforced with 30% chopped glass fiber for injection molding. It contains some bio-renewable resources Features: high dime.. |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ISO 527 |
Wellman Wellamid® MRGF25/15 42H-N 25% Mineral/15% Glass Fiber Reinforced Nylon 6, Heat Stabilized Typical Applications: Lawn and garden equipment, automotive trim, bezels, wheel covers, window frames, gas tank filler housings, brackets, metalized lighting reflectors for automotive, automotive co.. |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ISO 527-1, 2 |
Polyplastics Duranex® 3200 Polybutylene Terephthalate (PBT), Standard, 20% GF filled DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ISO 527-1/-2 |
DSM Arnite® TV6 240 PBT-GF20 20% Glass Reinforced |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | cond; ISO 527-1/-2 |
DSM Novamid® 1010GN2-30 NAT/BK37 PA6-GF30 FR(17) 30% Glass Reinforced, Flame Retardant |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | cond; ISO 527-1/-2 |
DSM Novamid® 1015G35 NAT PA6-GF35 35% Glass Reinforced, Injection Molding |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | cond; ISO 527-1/-2 |
DSM Novamid® 1015GH35 BK37 PA6-GF35 35% Glass Reinforced, Heat Stabilized, Injection Molding |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | cond; ISO 527-1/-2 |
DSM Novamid® 3010GN30 NAT PA66-GF30 FR(17) 30% Glass Reinforced, Flame Retardant |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | dry; ISO 527-1/-2 |
DSM Stanyl® TS250FK33 PA46-(GF+MF)30 FR 30% Glass/Mineral Reinforced, Flame Retardant, Low Warpage |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | cond; ISO 527-1/-2 |
DSM Stanyl® TW271B3 (PA46+PTFE)-CF15 15% Carbon Reinforced, Heat Stabilized, Wear and Friction Modified |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | 5mm/min; ISO 527 |
BASF Ultramid® B3GM35 Q611 15/25% Glass/Mineral Filled PA6 (Dry) Ultramid B3GM35 Q611 is a 40% combined glass-fiber and mineral reinforced injection molding PA6 grade. |
|||
Tensile Strength, Ultimate | 120 MPa @Temperature 649 °C |
17400 psi @Temperature 1200 °F |
|
ATI Allegheny Ludlum AL 453™ Stainless Steel Single phase iron-chromium ferritic stainless steel alloy. Should be annealed between 1450 and 1600°F and quickly cooled. Information provided by Allegheny Ludlum |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | 5mm/min; ISO 527 |
BASF Ultradur S 4090 G6 LS BK15077 30% Glass Filled PBT |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ISO 527-1/-2 |
DSM Arnite® TV6 241 SN PBT-GF20 FR(17) 20% Glass Reinforced, Flame Retardant |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | cond; ISO 527-1/-2 |
DSM Novamid® 3021GH30 BK629 PA66-GF30 30% Glass Reinforced, Heat Stabilized |
|||
Tensile Strength, Ultimate | 120 MPa | 17400 psi | ASTM data at 5 mm/min. |
BASF Capron® GR40 40% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron GR40 is a 40% glass reinforced polyamide 6 injection molding compound offering the highest level of strength, stiffness, high temperature performance and dimensional stability. It is also ava.. |
|||
Tensile Strength, Ultimate | 120 MPa @Temperature 160 °C |
17400 psi @Temperature 320 °F |
ISO 527-1/-2 |
DSM Stanyl® TS200F10 PA46-GF50 50% Glass Reinforced |
|||
Tensile Strength, Ultimate | 120 - 130 MPa @Temperature 130 - 180 °C |
17400 - 18900 psi @Temperature 266 - 356 °F |
Average value: 98.0 MPa Grade Count:5 |
Overview of materials for Polyphthalamide (PPA), Glass Fiber 40% This property data is a summary of similar materials in the MatWeb database for the category "Polyphthalamide, Glass Fiber 40%". Specific grades with glass content between 35% and 44% are included. .. |
|||
Tensile Strength, Ultimate | 120 - 130 MPa @Time 1.80e+7 - 7.20e+7 sec |
17400 - 18900 psi @Time 5000 - 20000 hour |
Average value: 98.0 MPa Grade Count:5 |
Overview of materials for Polyphthalamide (PPA), Glass Fiber 40% This property data is a summary of similar materials in the MatWeb database for the category "Polyphthalamide, Glass Fiber 40%". Specific grades with glass content between 35% and 44% are included. .. |
|||
Tensile Strength, Ultimate | 120 MPa @Temperature 1093 °C |
17400 psi @Temperature 1999 °F |
|
Haynes 230® alloy, cold rolled and 1232°C solution annealed sheet Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applicat.. |