Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | <= 54.0 MPa | <= 7830 psi | ISO 178 |
Polykemi AB POLYfill PPHC T8040 Polypropylene, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | 54.0 MPa @Temperature 250 °C |
7830 psi @Temperature 482 °F |
ASTM D790 |
Solvay Specialty Polymers AvaSpire® AV-750 GF40 Polyaryletherketone (PAEK)
(Unverified Data**) AvaSpire AV-750 GF40 is a 40% glass reinforced polyaryletherketone (PAEK) designed to fill the marketplace need for a lower-priced PEEK (polyetheretherketone). This resin provides the typical chemic.. |
|||
Flexural Strength | <= 54.0 MPa | <= 7830 psi | ISO 178 |
Polykemi AB POLYfill PPH T4030 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ISO 178 |
Lucite International Diakon® ST45G6 Toughened Acrylic Polymer The Diakon® impact PMMA series offer the best combination of impact, chemical and heat resistance and provide rigidity and surface hardness. The grades in the Diakon® series can be processed b.. |
|||
Flexural Strength | 54.0 MPa @Temperature 250 °C |
7830 psi @Temperature 482 °F |
ASTM D790 |
Solvay Specialty Polymers AvaSpire® AV-750 GF40 Polyaryletherketone (PAEK), 40% Glass Fiber AvaSpire® AV-750 GF40 is a 40% glass reinforced polyaryletherketone (PAEK) designed to fill the marketplace need for a lower-priced PEEK (polyetheretherketone). This resin provides the typical ch.. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | 1.3 mm/min, 50 mm span; ASTM D790 |
SABIC Innovative Plastics LNP STAT-LOY A3000TXJ ABS LNP* STAT-LOY* A3000TXJ is a product based on ABS resin. Added features of this material include: Antistatic, Transparent, Formulated with FDA Food Contact Additives. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ISO 178 |
SABIC Innovative Plastics LNP THERMOCOMP WH0450E PBT LNP* Thermocomp* WH0450E is a compound based on Polybutylene Terephalate resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ISO 178 |
SABIC Innovative Plastics LNP THERMOCOMP WH0450EX PBT (Asia Pacific) LNP* Thermocomp* WH0450EX is a compound based on Polybutylene Terephalate resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ISO 178 |
SABIC Innovative Plastics LNP THERMOCOMP WH0450E PBT (Asia Pacific) LNP* Thermocomp* WH0450E is a compound based on Polybutylene Terephalate resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D 790 |
SABIC Innovative Plastics Noryl EUN0240 PPE+HIPS (Asia Pacific) This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
A. Schulman POLYFORT™ FXP 1943 CaC03 and Glass Fiber Hybrid Copolymer Polypropylene DescriptionPolyfort® FXP 1943 is a 20% CAC03 and glass fiber hybrid copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
UBE UBESTA® 3020X15 Nylon 12 Thermister Description: UBESTA Nylon 12 ThermisterInformation provided by UBE. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
UBE UBESTA® 3020X8 Nylon 12 Thermister Description: UBESTA Nylon 12 ThermisterInformation provided by UBE. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
UBE UBESTA® 3024NUX Short Cycle Time Electronic Grade Nylon 12 Description: UBESTA Nylon 12 has an excellent termite resistance than other plastics. UBESTA contributes as a material for jacket and sheath which lay for telephone and telegram Communication System.. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
A. Schulman POLYFORT™ FXP 1943 CaC03 and Glass Fiber Hybrid Copolymer Polypropylene DescriptionPolyfort® FXP 1943 is a 20% CAC03 and glass fiber hybrid copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
A. Schulman POLYFORT™ FXP 1943 CaC03 and Glass Fiber Hybrid Copolymer Polypropylene DescriptionPolyfort® FXP 1943 is a 20% CAC03 and glass fiber hybrid copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
A. Schulman POLYFORT™ FXP 1943 CaC03 and Glass Fiber Hybrid Copolymer Polypropylene DescriptionPolyfort® FXP 1943 is a 20% CAC03 and glass fiber hybrid copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | 2 mm/min; ISO 178 |
Chi Mei Polylac® PA-765A ABS - Flame Retardant F.R. High Flow |
|||
Flexural Strength | 54.0 MPa | 7830 psi | chs 0.05 in/min; ASTM D790 |
Diamond Polymers Centrex® 813 General Purpose Injection Molding Grade ASA/AES Centrex 813 resin is a high-gloss, high-impact grade of ASA/AES, a blend of acrylonitrile-styrene-acrylate and acrylonitrile-ethylene-propylene styrene. This injection molding grade with a good bala.. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ISO 178 |
Azoty Tarnow™ TARNOFORM 300 TF4 POM Tribological modified grade with addition of 20% PTFE, with very low coefficient of friction and wear.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
Aclo Accucomp ABS ABS809SL Extrusion Grade |
|||
Flexural Strength | 54.0 MPa | 7830 psi | Wet; ASTM D790 |
Asahi Kasei Leona® 1502 Nylon 66 Similar to 1500 but with improved heat aging resistance.Applications:Under-the-hood automotive parts Information provided by Asahi Kasei |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
Teknor Apex Sinpolene TPP1030 Polypropylene Availability: Africa & Middle East; Latin America; Asia Pacific; South America Talc Filler, 30% Filler by Weight Uses: Automotive Applications; Housings Forms: Pellets Processing Method: Injection .. |
|||
Flexural Strength | <= 54.0 MPa | <= 7830 psi | ISO 178 |
Polykemi AB POLYfill PPH T8030 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | <= 54.0 MPa | <= 7830 psi | ISO 178 |
Polykemi AB POLYfill PPH TS4040 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | <= 54.0 MPa | <= 7830 psi | ISO 178 |
Polykemi AB POLYfill PPH TS5040 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | <= 54.0 MPa | <= 7830 psi | ISO 178 |
Polykemi AB POLYfill PPH TS5040DS Polypropylene Homopolymer, Mineral Reinforced, Detergent Resistant Information provided by Polykemi AB |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
SABIC Innovative Plastics LNP STAT-KON QD000I PA 6/10 LNP* STAT-KON* QD000I is a compound based on Nylon 6/10 resin containing Carbon Powder. Added features of this material include: Electrically Conductive, High Impact. |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
SABIC Innovative Plastics NORYL FN215Z PPE+HIPS (Asia Pacific) PPE + PS, FR foam molding grade |
|||
Flexural Strength | 54.0 MPa | 7830 psi | ASTM D790 |
SABIC Innovative Plastics LNP STAT-KON QD000I PA 6/10 (Asia Pacific) LNP STAT-KON* QD000I is a compound based on Nylon 6/10 resin containing Carbon Powder. Added features of this material include: Electrically Conductive. |