Polymer Property : Tensile Strength = 80.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength	80.0 MPa	11600 psi	ISO 527-1
Murtfeldt Murlubric® [FS] Oil Modified Nylon 6 Murlubric® is a modified cast polyamide that mineral oil is integrated into during polymerization. As a result, the material has self lubricating properties and retains its excellent characteristi..
Tensile Strength	80.0 MPa	11600 psi	ASTM D638
Premix Premi-Glas® 2203-30 CR-SX Fiberglass Reinforced SMC Description: Premi-Glas® 2203-30 CR-SX is a fiberglass reinforced thermoset Sheet Molding Compound formulated for excellent electrical properties and fire retardance; it also has very good thermal ..
Tensile Strength	80.0 MPa	11600 psi	ASTM D638
Premix Premi-Glas® 2204-30 CR-SX Fiberglass Reinforced SMC Description: Premi-Glas® 2204-30 CR-SX is a fiberglass reinforced thermoset Sheet Molding Compound formulated for excellent electrical properties and fire retardance; it also has very good thermal ..
Tensile Strength	80.0 MPa	11600 psi	at Yield; ISO 527-1/-2
Quadrant EPP Ertalon® 6 SA PA 6, extruded (ISO Data) This material offers an optimal combination of mechanical strength, stiffness, toughness, mechanical damping properties and wear resistance. These properties, together with good electrical insulatin..
Tensile Strength	80.0 MPa	11600 psi	at Yield; ISO 527-1/-2
Quadrant EPP Nylatron® NSM PA 6 + internal lubricant, cast (ISO Data) Nylatron NSM is a proprietary cast nylon 6 formulation containing solid lubricant additives which grant this materials self-lubricity, excellent frictional behaviour, superior wear resistance and ou..
Tensile Strength	80.0 - 100 MPa	11600 - 14500 psi	Compression; ISO 527
Raschig Group RESINOL® 87120 EPF Phenolic Glass-fiber reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and very good mechanical properties. This product meets ..
Tensile Strength	80.0 MPa	11600 psi	ASTM D638
Kolon KOCETALÂ® CF702 Conductive Grade Acetal Resin Carbon fiber added, high stiffness and conductive grade. Applications: Conductive products. Information provided by API-Kolon.
Tensile Strength	80.0 MPa	11600 psi	ASTM D638
Kolon KOPAÂ® KN3322V0Y Flame Retardant Nylon 66 Halogen free, Impact -resistantApplications A variety of connectorsInformation provided by API-Kolon.
Tensile Strength	80.0 MPa	11600 psi	DIN 53455
Isoflon PA 6.6 Polyamide 6.6 General use for mechanical partsGood heat resistanceEasy to useHigh moisture regainInformation provided by Isoflon.
Tensile Strength	80.0 MPa	11600 psi	DIN 53455
Isoflon PETP Polyethylene terephthalate Good optical propertiesHigh UV resistanceAbsorbs little moistureInformation provided by Isoflon.
Tensile Strength	80.0 MPa	11600 psi	ISO 527
Lucite International DiakonÂ® CLG902 Acrylic Polymer Information provided by Lucite International
Tensile Strength	80.0 MPa	11600 psi	ISO 527
Lucite International DiakonÂ® CLG902L Acrylic Polymer Information provided by Lucite International
Tensile Strength	80.0 MPa	11600 psi	ISO 527
Lucite International DiakonÂ® CLG902LX Acrylic Polymer Information provided by Lucite International
Tensile Strength	80.0 MPa	11600 psi	ISO 527
Lucite International DiakonÂ® Frost 902 51 Acrylic Polymer Information provided by Lucite International
Tensile Strength	80.0 MPa	11600 psi	ISO 527
Lucite International DiakonÂ® MG100 Acrylic Bead Polymer, High Transparency PMMA beads offer an exceptional transmission level of 92.5%, an increase of +0.5% in light transmission vs. granular grades - ideal for medical diagnostic devices.Information provided by Lucite Inte..
Tensile Strength	80.0 MPa	11600 psi	5 mm/min; ISO 527-1
Sax Polymers SAXAMID 136F4Q32 Nylon 6, 20% Glass Fiber SAXAMID 136F4Q32 is a high impact-modified polyamide 6 injection-molding-grade reinforced with 20% glass fibers.Information provided by SAX Polymers
Tensile Strength	80.0 MPa @Thickness >=1.50 mm	11600 psi @Thickness >=0.0591 in	24hr/23°C/50% RH; ISO 527; IEC/EN 60893-2 5.6
Elektro-Isola Etronax MF G Phenolic, Cotton Fabric Reinforcement, Black, Sheets Description: Exclusively for mechanical applications. Impact-resistant. Resistant to mechanical wear and noise-reducing. The graphite content causes low friction. Well suited for parts where there a..
Tensile Strength	80.0 MPa @Thickness >=1.50 mm	11600 psi @Thickness >=0.0591 in	24hr/23°C/50% RH; ISO 527; IEC/EN 60893-2 5.6
Elektro-Isola Etronax MF Phenolic, Cotton Fabric Reinforcement, Brown, Sheets Description: Exclusively for mechanical applications. Impact-resistant, resistant to mechanical wear, noise-reducing, low friction. Well suited for parts where there are high mechanical load and wea..
Tensile Strength	80.0 MPa @Thickness >=1.50 mm	11600 psi @Thickness >=0.0591 in	24hr/23°C/50% RH; ISO 527; IEC/EN 60893-2 5.6
Elektro-Isola Etronax MMMF PTFE Phenolic, Cotton Fabric Reinforcement, Light Brown, Sheets Description: Friction reducing material consisting of phenolic resin with PTFE (Teflon®) and a very fine cotton fabric. Exclusively for mechanical applications. Very good dry run properties. Well s..
Tensile Strength	>= 80.0 MPa	>= 11600 psi	IEC 1212-2 5.7
Hippe PF CC 204 Woven Cotton Cloth Reinforced Phenolic Resin - Sheet Used in mechanical and electrical applications (fine weave: =130 g/m2, >30 threads/cm). Recommended for small parts.Information provided by Hippe.
Tensile Strength	80.0 MPa	11600 psi	DIN 53 455
Hippe PET Polyethylene Terephthalate Linear, saturated polyesters are thermoplastics which are used where good dimensional accuracy, high creep resistance and good sliding and wear behavior are required. Partially crystallized PET pos..
Tensile Strength	80.0 MPa	11600 psi	dry; ISO 527
Azoty Tarnow™ Tarnamid® T-27 MCS V0 Polyamide 6 - Flame Retarded, Unreinforced Flame retarded (class V0), bromine and red phosphorus free, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has th..
Tensile Strength	80.0 MPa	11600 psi	ISO 527
Azoty Tarnow™ Tarnamid® T-27 MCS V2 Polyamide 6 - Flame Retarded, Unreinforced Flame retarded (class V2), bromine and red phosphorus free, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has th..
Tensile Strength	80.0 MPa	11600 psi	ISO 527
Azoty Tarnow™ Tarnamid® T-27 GF20 FRV2 Polyamide 6 - Flame Retarded, Reinforced Flame retarded grade, flammability class V2, reinforced with 20% glass fibers, without addition of any halogen compounds, red phosphorus and asbestos, doesn't release any toxic gases during burning...
Tensile Strength	80.0 MPa	11600 psi	cond.; ISO 527
Azoty Tarnow™ Tarnamid® T-27 GF20 GB10 Polyamide 6 - Glass Beads Reinforced 20% Glass fiber and 10% glass beads reinforced, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following ..