- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyester, TP
- Polyethylene Terephthalate (PET)
- Isoflon PETP Polyethylene terephthalate
Isoflon PETP Polyethylene terephthalate
| Category | Polymer , Thermoplastic , Polyester, TP , Polyethylene Terephthalate (PET) |
| Manufacturer | Isoflon |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Isoflon PETP Polyethylene terephthalate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Good optical propertiesHigh UV resistanceAbsorbs little moistureInformation provided by Isoflon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.38 g/cc | 1.38 g/cc | DIN 53479 |
| Water Absorption | 0.25 % | 0.25 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 96 | 96 | ASTM D785 |
| Tensile Strength | 80.0 MPa | 11600 psi | DIN 53455 |
| Elongation at Break | 10 % | 10 % | DIN 53455 |
| Tensile Modulus | 3.00 GPa | 435 ksi | DIN 53457 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 70.0 µm/m-°C | 38.9 µin/in-°F | DIN 52328 |
| Thermal Conductivity | 0.290 W/m-K | 2.01 BTU-in/hr-ft²-°F | DIN 52612 |
| Melting Point | 255 °C | 491 °F | DIN 53736 |
| Maximum Service Temperature, Air | 100 °C | 212 °F | Continuous; DIN 52612 |
| Deflection Temperature at 1.8 MPa (264 psi) | 100 °C | 212 °F | |
| Minimum Service Temperature, Air | -20.0 °C | -4.00 °F | Continuous; DIN 52612 |
| Flammability, UL94 | V-2 | V-2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | DIN 53482 |
| Dielectric Constant | 3.3 @Frequency 1000 Hz |
3.3 @Frequency 1000 Hz |
DIN 53483 |
| Dielectric Strength | 25.0 - 85.0 kV/mm | 635 - 2160 kV/in | DIN 53481 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Nat./Black |
Users viewing this material also viewed the following:
- Network Polymers SAN 277 Blue Tint Color
- SABIC Innovative Plastics Lexan® ML7667 PC Copolymer (Asia Pacific)
- Fiberfil® FV-30 Nylon 6, 30% Glass Reinforced, Heat Stabilized
- SABIC Innovative Plastics Noryl GTX GTX6013 PPE+PA6 (Asia Pacific)
- Zylog Hipolyene® 1533 NM Thermoplastic Polyolefin & PP Compound
- Carpenter BioDur™ 316LS Stainless Medical Implant Alloy, 60% Cold Worked
- Armstrong C-7/W Epoxy Adhesive, 2:3 Mix Ratio
- Bulk Molding Compounds tetra-DUR N 4303 Bulk Molding Compound
- LG Chemical SEETEC SF318 Linear Low Density Polyethylene, Blown Film Grade
Copyright © lookpolymers.com All Rights Reserved