Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 40 g/10 min @Load 3.80 kg, Temperature 230 °C |
40 g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D-1238 |
Plaskolite Optix® CA - 42 General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 230 °C |
40 g/10 min @Load 4.76 lb, Temperature 446 °F |
STN EN ISO 1133 |
Plastcom SLOVASTER® B BT Polyethylene Terephthalate FeaturesPBT basic type for injection moulding. Melt is characterized by outstanding fluidity, which enables injection moulding of complicated and divided products also on multiple moulds. Anisotro.. |
|||
Melt Flow | 40 g/10 min @Load 0.325 kg, Temperature 270 °C |
40 g/10 min @Load 0.716 lb, Temperature 518 °F |
|
Plastcom SLOVASTER® B PBT, basic type FeaturesPBT basic type for injection molding. Melt is characterised by outstanding fluidity, which enables injection molding of complicated and divided products also on multiple molds. Anisotropy of.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 190 °C |
40 g/10 min @Load 4.76 lb, Temperature 374 °F |
Procedure A Condition E; ASTM D1238 |
Network Polymers NPP 50-4052 Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc. |
|||
Melt Flow | 40 g/10 min @Load 1.20 kg, Temperature 300 °C |
40 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
SABIC Innovative Plastics Lexan® HFD1830 PC Copolymer 40 MFR LEXAN High Flow Ductile Copolymer UV Stabilized |
|||
Melt Flow | 40 g/10 min @Load 10.0 kg, Temperature 220 °C |
40 g/10 min @Load 22.0 lb, Temperature 428 °F |
|
PTS SAN-82TR SAN Resin Information provided by Polymer Technology and Services, LLC (PTS). |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 190 °C |
40 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D 1238 |
Chevron Phillips KN 230 LDPE Injection Molding Resin
(discontinued **) Resin Type: Homopolymer; ASTM D 4976 Classification: PE 111, A 22200Characteristics: Good Flexibility, Excellent Flow, Good Warping Resistance, Good Mold Release, Moderate ESCRApplications:Houseware.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 190 °C |
40 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Eastman 18DOA Polyethylene
(discontinued **) Polyethylene 18DOA is a low density formulation suggested for the production of closures where a high melt index material is needed to meet shrinkage requirements and fast molding cycles. It molds .. |
|||
Melt Flow | 40 g/10 min | 40 g/10 min | ASTM D1238 |
Formosa Plastics Formolene® LH5240 Injection Molding HDPE
(discontinued **) CopolymerApplications: Thin wall containersInformation provided by Formosa Plastics Corporation, USA. |
|||
Melt Flow | 40 - 70 g/10 min | 40 - 70 g/10 min | Melt Volume Rate (cm³/10 min) |
Huntsman IROGRAN® A 92 P 4637 TPU-Polyether Excellent resistance to hydrolysis and microbial attack. Suggested for injection molding and extrusion.Information provided by Huntsman |
|||
Melt Flow | 40 g/10 min @Load 10.0 kg, Temperature 220 °C |
40 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D1238 |
LG Chemical AF360C ABS, TBBA-free Flame Retardant, High Flow Feature: Injection Molding, TBBA-free Flame Retardant, High FlowApplication: Electric/Electronic Applications (TV, Monitor Housing) IT/OA deviceCAS No. 9003-56-9 and 1309-64-4Information provided by.. |
|||
Melt Flow | 40 g/10 min @Load 5.00 kg, Temperature 260 °C |
40 g/10 min @Load 11.0 lb, Temperature 500 °F |
ASTM D1238 |
Kingfa LONOY 1300 PC/PBT Alloy Features:Excellent balance propertiesGood weather resistanceGood size stabilitySmooth surfaceUniform colorApplications:Injection moldingAutomobile bumperAutomobile interior/exterior trim partsBusine.. |
|||
Melt Flow | 40 g/10 min @Load 10.0 kg, Temperature 220 °C |
40 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D1238 |
LG Chemical HF380XC ABS, High Flow, High Surface Gloss Feature: Injection Molding, High Flow, High Surface GlossApplication: High melt flow index is suitable for injection molding of large and complicated part. High thermal stabilities enables to expres.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 230 °C |
40 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
LG Chemical LUPOL HI5302RB PP+MF25%, High Impact Description: Injection Molding, PP+MF25%, High Impact, Good WeatherabilityApplication: Automotive Interior PartsCAS: 9003-07-0, 9010-79-1 and 14807-96-6Information provided by LG Chemical |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 230 °C |
40 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Ineos L40N-00 Polypropylene Impact Copolymer L40N-00 is a nucleated high flow polypropylene, medium impact copolymer for injection molding applications. This resin exhibits an excellent balance of resin flow and mechanical properties. This res.. |
|||
Melt Flow | 40 - 60 g/10 min @Load 10.0 kg, Temperature 190 °C |
40 - 60 g/10 min @Load 22.0 lb, Temperature 374 °F |
ISO 1133 |
Lubrizol Advanced Materials Pearlbond® 12F75UV Thermoplastic Polyurethane Pearlbond™ 12F75UV is a UV-resistant standard polyester-based TPU supplied in form of translucent, colorless pellets, featuring a low melting point and very low gel content. Processed by extrus.. |
|||
Melt Flow | 40 g/10 min @Load 10.0 kg, Temperature 300 °C |
40 g/10 min @Load 22.0 lb, Temperature 572 °F |
Estimated using room temperature density; ISO 1133 |
Lanxess Durethan® DP BC 500 H2.0 901510 Nylon 6 PA 6, extrusion and blow molding grade, non-reinforced, elastomer-modified, high viscosity, good heat-ageing resistance |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 250 °C |
40 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
Samyang Tribit® 1551GN30 PBT, Impact Crystallization is fast, formability is excellent and thermal resistance, chemical resistance, electrical properties and abrasion resistance are excellent.1551GN30 is an impact grade.Information pro.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 230 °C |
40 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
SCG Chemicals EL-Proâ„¢ P841J Polypropylene Injection Molding Key Characteristics:Excellent flowabilityExcellent processabilityHigh stiffnessSuitable for complex parts and large partsContains UV stabilizer and anti-static agentRecommended Applications:Electric.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 230 °C |
40 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
SCG Chemicals EL-Proâ„¢ P842J Polypropylene Injection Molding Key Characteristics:Excellent flowabilityExcellent processabilityExcellent stiffnessSuitable for complex parts and large partsRecommended Applications:Electrical appliance parts, mainly for refriger.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 230 °C |
40 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Borealis Daplen™ EH104AE Polypropylene TPO Compound Daplen™ EH104AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness, high.. |
|||
Melt Flow | 40 g/10 min @Load 1.20 kg, Temperature 224 °C |
40 g/10 min @Load 2.65 lb, Temperature 435 °F |
ASTM D1238 |
Lubrizol Estane® 2103-80AE Thermoplastic Polyurethane Elastomer Formerly PellethaneAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 2009. |
|||
Melt Flow | 40 g/10 min @Load 1.20 kg, Temperature 224 °C |
40 g/10 min @Load 2.65 lb, Temperature 435 °F |
ASTM D1238 |
Lubrizol Estane® 2103-84AEN Thermoplastic Polyurethane Elastomer Formerly PellethaneFeature: Contains UV Stabilizer, NSF Standard 61 certifiedAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pelletha.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 190 °C |
40 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
ExxonMobil LD 637.LI Molding, Extrusion and Compounding Resin Product Description: LD 637.LI is a high melt index LDPE homopolymer intended for injection molding or compounding applications requiring high flow. It is ideal for tamper-evident, tear-to-open clos.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg |
40 g/10 min @Load 4.76 lb |
Melt flow ratio I10/I2 is 8.5. |
Dow DOWLEX™ IP-41 High Density Polyethylene DOWLEX® IP-41 resin is an improved processing high density polyethylene resin designed to offer excellent processability and rigidity required for food containers, overcaps, and other general purpo.. |
|||
Melt Flow | 40 g/10 min @Load 2.16 kg, Temperature 230 °C |
40 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238L |
Braskem H 105 Injection Molding Polypropylene Description: H 105 is a high melt flow rate homopolymer with high transparency. Designed for use on thin-walled injection molding parts with high output. This product exhibits excellent processabili.. |
|||
Melt Flow | 40 g/10 min @Load 5.00 kg, Temperature 235 °C |
40 g/10 min @Load 11.0 lb, Temperature 455 °F |
3 min.; ASTM D1238 |
ALM PA 250 Nylon 12 SLS Prototyping Polymer Highly Recyclable Nylon 12 Laser Sintering Material.Engineered for excellent mechanical properties, part definition and surface finish. Stabilized against thermal degradation resulting in little or.. |
|||
Melt Flow | 40 g/10 min @Load 10.0 kg, Temperature 360 °C |
40 g/10 min @Load 22.0 lb, Temperature 680 °F |
ISO 1133 |
BASF Ultrason S 2010 G4 20% Glass Filled PSU Ultrason S 2010 G4 is a 20% glass reinforced, medium viscosity injection molding PSU grade with high rigidity and strength. |