- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Vicone High Performance Rubber VicoSil™ 369DLK-GY High Performance Silicone Rubber
Vicone High Performance Rubber VicoSil™ 369DLK-GY High Performance Silicone Rubber
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone Rubber |
| Manufacturer | Vicone High Performance Rubber |
| Trade Name | VicoSil™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Vicone High Performance Rubber VicoSil™ 369DLK-GY High Performance Silicone Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
UL94 approved
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.19 g/cc | 0.0430 lb/in³ | ASTM D297 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 60 | 60 | ASTM D2240 |
| Tensile Strength | 8.20 MPa | 1190 psi | ASTM D412 |
| Elongation at Break | 310 % | 310 % | ASTM D412 |
| Compressive Modulus | 0.00450 GPa @Strain 5 % |
0.653 ksi @Strain 5 % |
ISO-7743 |
| 0.00470 GPa @Strain 10 % |
0.682 ksi @Strain 10 % |
ISO-7743 | |
| 0.00500 GPa @Strain 20 % |
0.725 ksi @Strain 20 % |
ISO-7743 | |
| 0.00590 GPa @Strain 25 % |
0.856 ksi @Strain 25 % |
ISO-7743 | |
| Compression Set | 20 % | 20 % | ASTM D395 |
| Tensile Set | 5.5 % | 5.5 % | ASTM D412 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Grey | |
| Effect of Liquids - Change in Elongation (%) | -6.1 | ASTM D471 |
| Effect of Liquids - Change in Hardness (%) | -7 | ASTM D471 |
| Effect of Liquids - Change in Tensile Strength (%) | -5.7 | ASTM D471 |
| Effect of Liquids - Change in Volume after Oil Immersion (%) | 6.5 | ASTM D471 |
| Heat Aging - Change in Elongation (%) | -31.23 | ASTM D573 |
| Heat Aging - Change in Hardness (%) | 7 | ASTM D573; 200°C; 72h |
| Heat Aging - Change in Tensile Strength (%) | -19.88 | ASTM D573 |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Rigid Extrusion L4536 Polyvinyl Chloride, Rigid (PVC, Rigid)
- SABIC Innovative Plastics LNP COLORCOMP D1000 PC (Europe-Africa-Middle East)
- Lubriplate AC-4 Petroleum-Based Air Compressor Fluid
- Momentive Performance Materials Siloprenâ„¢ LSR 2631 Liquid Silicone Rubber - Non Post Cure / Low Compression Set
- Sylvin Technologies 8915-70 Natural PVC Extrusion Compound
- DSM Akulon® SG-KGS6 PA66-GF30 FR
- ChevronTexaco Delo® NLGI 1 Grease EP
- Ashley Polymers Ashlene® 520S-13GU Nylon 66, 13% Glass Reinforced
- Arlon R33089X028 0.029" (0.737 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved